Subscribe to Our Youtube Channel
Related Manuals for SIDLER Singa 1/19''
Summary of Contents for SIDLER Singa 1/19''
- Page 1 OPERATING INSTRUCTIONS SIDLER Singla 1 / 19’’ Please read instructions before proceeding Save these instructions V 03.15 1/15...
- Page 2 OPERATING INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS – to reduce the risk of burns, fire, electric shock, or injury: This product is for household use only The maximum load is 1.5kg (3lbs) per glass shelf WARNING – do not use outdoors ...
- Page 3 OPERATING INSTRUCTIONS List of all components to be installed Pos. Pcs. Description Dimension [mm] Comment mirror door cover cap dampener glass shelve screw Ø4.5 x 35 cosmetic mirror cosmetic box dampener dump stop shelf holder spare part slider spare part pos.
- Page 4 OPERATING INSTRUCTIONS Installation Guide Step 1 – Remove the mirror doors 1) Remove the door (pos.1) from the cabinet by draw clip C. !Attention! Do properly hold the door before pushing clip C Handle door carefully pos. 1 cabinet clip C V 03.15 4/15...
- Page 5 OPERATING INSTRUCTIONS Step 3 – surface mounts 1) Use wall mount kit including side mirrors (see separate Operating wall mount kit for Singla Instruction ) if cabinet will be wall mounted. V 03.15 5/15...
- Page 6 OPERATING INSTRUCTIONS 2) Proceed with step 4 if cabinet will be recessed. V 03.15 6/15...
- Page 7 OPERATING INSTRUCTIONS Step 4 – recessed mount cabinet 1) Place the cabinet in the provided opening 18.2" x 24" which is surrounded by 2’’ x 4’’ studs. 2) If the cabinet does not fit in to the provided opening, do rework on the opening and studs until cabinet fits.
- Page 8 OPERATING INSTRUCTIONS Step 5 – Doors 1) Hang the doors on the hinges (pos. 1). pos.1 cabinet 2) Align the doors (pos. 1) on the hinges (see diagram for adjustment possibilities). adjust the door with these screws V 03.15 8/15...
- Page 9 OPERATING INSTRUCTIONS 3) Place the cover cap on the door dampeners (pos. 2) and attach the door dampeners (pos. 7) to the hinges. pos. 7 pos. 2 V 03.15 9/15...
- Page 10 OPERATING INSTRUCTIONS Step 6 – Final Assembly 1) Push the dump stops (pos. 8) into the holes provided. pos. 8 2) Push the slider (pos. 10) into the holes provided and turn it by 90°. pos. 10 V 03.15 10/15...
- Page 11 OPERATING INSTRUCTIONS 3) Push the shelf holder (pos. 9) gently down pos. 9 4) Put the shelf holder into place by gently pushing down push V 03.15 11/15...
- Page 12 OPERATING INSTRUCTIONS 4) Place the glass shelf (pos. 3) into the shelf holder. Glass shelf (pos. 3) must always be positioned horizontally! pos. 3 V 03.15 12/15...
- Page 13 OPERATING INSTRUCTIONS Step 7 – Cleaning 1) Mount the glass cover in accordance with the diagram. Do not use abrasive cleaners, scrapers, metal brushes, or any items or products that could scratch or dull the surface. Do not allow the surface to come into contact with products such as acetone (nail polish remover), dry cleaning solution, lacquer thinner, gasoline, etc.
- Page 14 OPERATING INSTRUCTIONS Step 8 – Cosmetic Box and Cosmetic Mirror The cosmetic mirror (pos. 5) and the cosmetic box (pos. 6) are positioned individually by the customer. cosmetic mirror cosmetic box V 03.15 14/15...
- Page 15 OPERATING INSTRUCTIONS LIMITED WARRANTY SIDLER will provide a two-year warranty in respect of defects associated with the Product, commencing from the date of delivery, subject to the following conditions: ( I ) The Product must have been professionally mounted and installed by...
Need help?
Do you have a question about the Singa 1/19'' and is the answer not in the manual?
Questions and answers