Page 1
Assembly Instructions 140L Compost Tumbler Tumbleweed’s 140L Compost Tumbler is ideal for small urban courtyards and verandahs. Super compact and easy to use, just load the barrel then turn it every few days, leaving you with fantastic mulch in just four weeks or rich compost in six.
Page 2
Carefully turn the tumbler over and insert 6 screws with washers into the positions opposite the 6 screws already in place. The hole next to the opening on the panel without a metal part must remain empty of screws. www.tumbleweed.com.au...
Page 3
Insert the door by sliding the flat part of the sides into the slots provided (Figure 6). Start by inserting one side. Insert the second side by gently pushing the wall outwards. To remove the door simply reverse this procedure. www.tumbleweed.com.au...
Page 4
Attach the aluminium sheaths (12) for the axle screws (10) to the axle screws from the inside. If necessary, lift the tumbler a little to fully insert them into the holes. Use a spanner to attach the axle nuts to the axles. Your compost tumbler is now fully assembled and ready for use. www.tumbleweed.com.au...
Need help?
Do you have a question about the 000014 and is the answer not in the manual?
Questions and answers