Do you have a question about the Home fin Series and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for sentlotec Home fin Series
Page 1
Sauna heater Home fin HOME-F45 / 1-039-794: Home fin 4,5 kW HOME-F60 / 1-039-795: Home fin 6,0 kW HOME-F75 / 1-039-796: Home fin 7,5 kW HOME-F90 / 1-039-797: Home fin 9,0 kW INSTRUCTIONS FOR INSTALLATION AND USE English Version 07/16 Ident no.
Table of Contents About these instructions Important information for your safety 2.1. Intended use 2.2. Safety information for the installer 2.3. Safety information for the user Product description 3.1. Scope of delivery 3.2. Product functions Installation and connection 4.1. Installation location and sensor position 4.2.
Page 3
Maintenance 7.1. Extended periods of non-use 7.2. Cleaning the sauna heater 7.3. Changing the sauna stones Disposal Problem-solving by the installation engineer 10. Technical data WORLD OF WELLNESS...
Instructions for installation and use p. 4/26 1. About these instructions Carefully read these instructions for installation and use, and keep them near the sauna. This means you can refer to information regarding both your own safety and sauna operation at any time. These installation and operating instructions can also be found in the downloads section of our website: www.sentiotec.com/downloads.
Instructions for installation and use p. 5/26 2. Important information for your safety The Home fin sauna heater has been produced in accordance with the applicable safety rules and regulations. However, hazards may still occur during use. You should therefore adhere to the following safety information and the specific warnings in the individual chapters.
Page 6
Instructions for installation and use p. 6/26 ● Only install one sauna heater in the cabin. The Home fin sauna heater must not be used together with other sauna heaters in a sauna cabin. ● The roof and walls of the sauna cabin are manufactured from low-resin, untreated or thermally treated wood, e.g.
Instructions for installation and use p. 7/26 2.3. Safety information for the user ● The device must not be used by children under 8 years old. ● The device may only be used by children over 8 years old, by persons with limited psychological, sensory or mental capabili- ties or by persons with lack of experience/knowledge under the following conditions:...
Page 8
Instructions for installation and use p. 8/26 ● Heat up the sauna heater for half an hour BEFORE using the sauna for the first time. Do NOT remain in the sauna cabin during this period. Then ventilate the sauna cabin well (see 5.2. Heating up for the first time on page 20).
Instructions for installation and use p. 9/26 3. Product description 3.1. Scope of delivery ● Sauna heater ● Instructions for installation and use 3.2. Product functions The Home fin sauna heater is a Finnish sauna heater and makes it possible to produce a typical Finnish sauna climate of 80 °C to 100 °C with an air humidity of approximately 10%.
Installation instructions, only for experts p. 10/26 4. Installation and connection Take the following points into account when positioning and connecting the sauna heater: WARNING! Danger of electric shock ● The sauna heater may only be installed and connected when the power supply is disconnected.
Installation instructions, only for experts p. 11/26 4.2. Safety distances Observe the minimum safety distances specified in Fig. 1. Fig. 1 Safety distances for the Home fin 4,5 kW, 6,0 kW, 7,5 kW und 9,0 kW (HOME-F45 / HOME-F60 / HOME-F75 / HOME-F90) Dimensions in mm min 40 WORLD OF WELLNESS...
Installation instructions, only for experts p. 12/26 4.3. Installation on the cabin wall Observe Fig. 1, Fig. 2, Fig. 3 and Fig. 4 (page 11, 12, 13). 1. Attach the mounting rail 1 to the wall horizontally using the wood screws supplied 2.
Page 13
Installation instructions, only for experts p. 13/26 Fig. 3 Position of the mounting rail for Home fin Dimensions in mm Fig. 4 Securing the Home fin (mounting rail) WORLD OF WELLNESS...
Installation instructions, only for experts p. 17/26 4.7. Wiring diagrams HC4-FIN-45 HC4-FIN-60 4.5 kW 6.0 kW U V W N U V W N to the control unit to the control unit HC4-FIN-75 HC4-FIN-90 7.5 kW 9.0 kW U V W N U V W N to the control unit to the control unit...
Installation instructions, only for experts p. 18/26 4.8. Electrical connection 1. Unscrew the screws 1 with a screwdriver. Remove the cover plate 2. Connection Home fin 4.5 kW, 6.0 kW, 7.5 kW and 9.0 kW (HOME-F45 / HOME-F60 / HOME-F75 / HOME-F90) 1.
Instructions for use for the user p. 19/26 5. Starting up 5.1. Filling the stone container WARNING! Risk of fire due to overheating If the sauna heater is used without sauna stones, the cabin walls will become extremely hot. This could cause fires. ●...
Instructions for use for the user p. 20/26 5.2. Heating up for the first time CAUTION! Formation of smoke and odours when heating up for the first time Working materials from the manufacturing process will be present on the new heating elements. These evaporate when the sauna heater is heated up for the first time.
Instructions for use for the user p. 21/26 6. Operation WARNING! Risk of fire Flammable objects that are placed on the heater will ignite and cause fires. ● NEVER place flammable objects on the sauna heater. ● Make sure that NO flammable objects are located on the heater before operating it.
Instructions for use for the user p. 22/26 7. Maintenance 7.1. Extended periods of non-use Moisture can accumulate in the heating rods in especially humid ambient con- ditions or during long periods of non-use. This is a physical process and not a manufacturer error.
Instructions for use for the user p. 23/26 1. Remove the old sauna stones. 2. Clear the stone container of limescale deposits, dust and other contamination. 3. Wash the stones thoroughly using water and a brush before use. Do not use any cleaning additives.
Instructions for use for the user p. 24/26 9. Problem-solving by the installation engineer Baking out of the heating rods Moisture can accumulate in the heating rods in especially humid ambient con- ditions or during long periods of non-use. This is a physical process and not a manufacturer error.
Instructions for installation and use p. 25/26 10. Technical data The dimensions can be found in Fig. 8. Weight Power Minimum size of Article Cabin vol- without rating ventilation opening number ume [m stones [kW] [mm] [kg] HOME-F45 3 - 6 350 x 25 HOME-F60 5 - 9...
Need help?
Do you have a question about the Home fin Series and is the answer not in the manual?
Questions and answers