HP 744 Owner's Manual page 129

The Boot Console Interface
Displaying and Setting the Monitor Type
If no keyboards are found the following message is displayed:
To advance all graphics adapter monitors to the next resolution, press the <Tab>
key one time and wait five seconds for all monitor types to change. Do not hold
down the <Tab> key or press it multiple times as this will cause the monitor
types to advance for each press of the <Tab> key.
4 When the following message is displayed, press the <Esc> key to confirm
selection of the device as the console:
Press the <Esc> key to confirm selection of GRAPHICS(s) as
the CONSOLE.
This selection will timeout in 10 seconds if not confirmed.
NOTE: The message is displayed for only ten seconds before console search is
resumed. Press <Esc> as soon as possible after the message is displayed.
The following message is displayed on the selected display:
GRAPHICS(s) MONITOR INFORMATION
Slot
----
Selected CONSOLE path is: GRAPHICS(s)
Selected KEYBOARD path is: PS2
A-22
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
WARNING: No keyboard(s) found. Turn off system
power, check keyboard connection(s) and
repeat interactive console search.
Model
-----------------
0 INTERNAL_EG_1280
Type Resolution Freq
---- ---------- ----
12 1280x1024 75Hz
Class
-----