Advertisement
FERN PAGODA INSTALLATION INSTRUCTIONS
TM
Thank you for buying RAB lighting fixtures. Our goal is to design the best quality products to get the job done right. We'd like to hear your comments.
Call the Marketing Department at 888-RAB-1000 or email: marketing@rabweb.com
WIRING
The Pagoda/ LL series permits operation only at 12 VAC.
Wire fixture using UL approved wire connectors (ordered
separately) for SPT-1 cord.
Use UL approved wiring connectors for SPT-1 cord
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool enough
to touch. Do not clean or maintain while fixture is
energized.
1. Lens should be washed in a solution of warm water and
any mild, non abrasive household detergent, rinsed with
clean water and wiped dry.
2. Do not open fixture to clean the LED. Do not touch the
LED.
TROUBLESHOOTING
1. Check that the voltage at fixture is correct. Refer to wiring
directions.
Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation operation
or maintenance.
Easy Answers
rabweb.com
© 2017 RAB LIGHTING Inc.
Visit our website for product info
Northvale, New Jersey 07647 USA
Pagoda LL IN 0217
Tech Help Line
e-mail
Call our experts - 888 722-1000
Answered promptly - sales@rabweb.com
ACCESSORIES
Following accessories should be ordered separately -
FERNFCC
Fixture to Cable Connector
FERNCCC
Cable to Cable Connector
CORD16/12V-100 16GA SPT-2W 12V 3.7A 100FT cord
SPIKE14
14 inches Spike
RTX12-75-TPC
75W Transfomer with Timer and Swivel
Photocell
RTX12-100-TPC
100W Transfomer with Timer and Swivel
Photocell
FERNLLSFCx
Full Cut Off Shade only*
FERNLLS1x
1 Tier Shade only*
FERNLLS2x
2 Tier Shade only*
FERNLLSTx
Stem only*
* x denotes fixture finish. A for Bronze, B for Black, D for Sand
and W for White.
Free Lighting Layouts
Answered online or by request
Advertisement
