Do you have a question about the CR72 and is the answer not in the manual?
Questions and answers
Annie
April 28, 2025
How do I delete my alarm.
1 comments:
Mr. Anderson
May 15, 2025
To delete the alarm on the Lenoxx CR72, press the “VOL + AL 1” or “VOL - AL 2” button until there is no buzzer or radio icon shown on the screen. This cancels the daily alarm.
This answer is automatically generated
John McCarthy
April 14, 2025
how do you rotate the projected image
1 comments:
Mr. Anderson
April 14, 2025
You cannot rotate the projected image on a Lenoxx CR72. The projector can only point directly up to the ceiling, and its angle cannot be adjusted.
This answer is automatically generated
Sonja Van Otterdijk
March 31, 2025
Can you preset the volume of the radio in alarm mode? It goes of in volume 16, would like to bring it back to two.
This is while the radio itself is set on volume 2
1 comments:
Mr. Anderson
May 14, 2025
No, the Lenoxx CR72 does not have a function to preset or lower the alarm volume. The alarm starts at the set volume and then immediately rises to maximum volume.
Page 1
Model no: CR72 Batch no: PR3798 The illustrations used in the manual are to illustrate the operation method and product structure of the product. Where there is a small difference between the physical item and the illustrations, please take the physical as the standard.
Page 2
IMPORTANT SAFEGUARDS: Please read and retain these instructions for future reference. Remove the appliance from its packaging and check that it is in good condition before use. Do not let children play with any parts of the packaging (such as plastic bags, etc.). Check the household voltage matches the appliances rated specification.
Page 4
OPERATING INSTRUCTIONS: Setting the clock: 1. You must switch off the radio before you set the clock time. 2. Press and hold the “Pre/M+/TIME Set” button until the display begins to flash. 3. Press the Hour and Minute buttons to adjust the time. If the hour is in PM, press the Hour button until the PM indicator is shown on the display.
Page 5
Radio: To increase radio reception, use the wire antenna. Ensure the wire antenna is un-wound, hold it upwards and tape it to a wall. 1. Press the “ON/OFF” button to turn the clock radio on or off. 2. Press the “AM/FM” button to select radio band. 3.
Need help?
Do you have a question about the CR72 and is the answer not in the manual?
Questions and answers
How do I delete my alarm.
To delete the alarm on the Lenoxx CR72, press the “VOL + AL 1” or “VOL - AL 2” button until there is no buzzer or radio icon shown on the screen. This cancels the daily alarm.
This answer is automatically generated
how do you rotate the projected image
You cannot rotate the projected image on a Lenoxx CR72. The projector can only point directly up to the ceiling, and its angle cannot be adjusted.
This answer is automatically generated
Can you preset the volume of the radio in alarm mode? It goes of in volume 16, would like to bring it back to two. This is while the radio itself is set on volume 2
No, the Lenoxx CR72 does not have a function to preset or lower the alarm volume. The alarm starts at the set volume and then immediately rises to maximum volume.
This answer is automatically generated