Table of Contents
Advertisement
4.1. MEMORIES AND DATA
TRANSFER [1 MEMORY]
The memory options (Fig. 4.5.) for this dive
computer include the combined Logbook and
Dive Profi le Memory (Fig. 4.6. – 4.12.), Dive
History Memory (Fig. 4.13. – 4.14.) and the
Data Transfer and PC-Interface functions (Fig.
4.15.).
The dive entry time and date is registered in
the Logbook memory. Always check before
diving that the time and date are correctly set,
especially after traveling between different
time zones.
4.1.1. Logbook and Dive Profi le
Memory [1 LOGBOOK]
This instrument has a very sophisticated high
capacity Logbook and Profi le Memory, with a
default data recording interval of 20 seconds.
Dives shorter than the recording interval are
not registered. You have the possibility to set
the recording interval to 10, 20, 30 or 60 sec-
onds (See Setting Preferences).
To enter the Logbook Memory Mode select
MODE- 1 MEMORY- 1 LOGBOOK.
For each dive there are four pages of logbook
dive information. Use the scroll buttons to
scroll the display between Logbook pages I,
II, III and IV. The data of the most recent dive
is shown fi rst.
The logbook dives can be scrolled through
displaying only the fi rst page of each dive,
or scrolling through the 4 different pages of a
dive.
When at the fi rst page of a dive use the MODE
button to change the scroll sequence. When
the arrow icon is next to the Mode button the
scroll button will scroll through the fi rst page
only of each dive.
Fig. 4.5. Memory options.
[3 MEMORY].
Fig. 4.6. Logbook option.
[1 LOGBOOK].
Fig. 4.7. Logbook, page
I. Scroll different pages of
specifi c dive.
45
Advertisement
Table of Contents
