Subscribe to Our Youtube Channel
Related Manuals for ipixo WIFI Doorbell
Summary of Contents for ipixo WIFI Doorbell
- Page 1 WIFI Doorbell Quick Start Guide...
-
Page 2: Table Of Contents
Contents What’s in the box? Doorbell Features Download App Doorbell Setup Installation Live View Reset... -
Page 3: What's In The Box
What’s in the box? ipixo Warranty Card • iPixo WIFI Doorbell • Micro USB Charging Cable • Indoor Chime • Wall Screws • Rechargeable Batteries • Warranty Card 1. Take off the mounting bracket from the back of the doorbell by sliding it down and away from the doorbell 2. -
Page 4: Doorbell Features
Doorbell Features Micro USB PIR Motion Charging Port Reset Button Sensor Infra red Lens Microphone Wifi Status Indicator Battery Compartment Button We recommend fully charging the doorbell before setup and installation. Simply use the provided Micro USB Cable to recharge. A full recharge can take up to 5 hours... -
Page 5: Download App
Download App Download the ToSee app from the App Store or Google Play Store... -
Page 6: Doorbell Setup
Doorbell Setup Step 1 Step 2 Open the ToSee app. The LED status indicator should be Press Add Device flashing red – this means the doorbell is ready to connect. Press “The red light is flashing” If the status indicator is not flashing red, press and hold down the Reset button at the back of the Doorbell until the LED indicator flashes red. - Page 7 Doorbell Setup Step 3 Step 4 Press Connect to the “Enter the configuration Doorbell’s network interface” to enter your (TOSEE_XXXXXX) phone’s WIFI settings...
- Page 8 Doorbell Setup Step 5 Step 6 Return to the ToSee You will now see a list of App. nearby WIFI Routers. The App will show that Select your home WIFI you have successfully and enter your WIFI connected to the router password.
- Page 9 Doorbell Setup Step 7 Step 8 Enter a password for Give your Doorbell the Doorbell. a name. This is required when Then press Confirm sharing the Doorbell The Doorbell is now and configuring successfully connected. settings Please reconnect to your WIFI Router through the WIFI Settings on your smartphone then do the following: 1.
-
Page 10: Installation
Wall Plugs Screws (provided) (provided) ipixo Install height Warranty Card We recommend that you install the ipixo WIFI Doorbell around 4 feet from the ground. Warranty Card This is the best height for the Doorbell’s field of view and motion detection range. 4 Feet (1.2 metres) - Page 11 Step 1 Step 2 Mark screw holes where Drill pilot holes. you would like to install Use the included wall the mounting bracket anchors if you’re drilling into stone or hard material Step 3 Step 4 Install the mounting Finally, use the provided bracket on to the wall security screw to secure using the four screws.
-
Page 12: Live View
Live View Share Doorbell Doorbell Settings Change Access settings to video best suit recordings your outdoor environment Switch view Click to to full activate or screen mute the speaker Record live footage to Save a your screenshot smartphone to your gallery smartphone gallery... -
Page 13: Reset
Reset If you are having trouble connecting to the WIFI Doorbell you may need to do a reset. Step 1 Step 2 Open the ToSee App Click Yes to remove the Step 3 and click Delete Doorbell from the App Press the Reset button on the back of the Doorbell for up to 20 seconds until the LED status... -
Page 14: Additional Information
Additional Information To get the best out of your Camera, please visit: www.ipixo.com/wifidoorbell If you’re still struggling with setup and if you require any help to make the most of your camera please contact our customer services team. Email: support@ipixo.com...
Need help?
Do you have a question about the WIFI Doorbell and is the answer not in the manual?
Questions and answers