Operation Procedures - Horizon Fitness FC-11 Manual

2. Set Up and Operation

2-1 Operation Procedures

1.
Turn trimming length adjust knob and
set stopper to required book size.
Red line indicates book size.
Fasten lock lever after set up.
NOTE
Remove transport guide when book size is
adjusted shorter than 17 cm (6.7").
2.
Turn power on and then depress motor
ON button.
3.
Depress single cut button to set knife to
its home position.
4.
Depress start button of collator and then
depress stop button after a set of sheets is
delivered to SPF-11. Make sure that
booklet is trimmed correctly.
5.
Start collating.
NOTE
If main motor of FC-11 is not on, main
motor of SPF-11 can not be started even if
motor ON button of SPF-11 is depressed.
Adjust Knob Lock Lever
Trimming Length Adjust Knob
10
Transport Guide