Table of Contents
Advertisement
Quick Links
Thank you for choosing the Manosplint
made to bring you a precision engineered product with the promise of many
years of valuable service. In order to obtain maximum benefit from your
machine please read these instructions carefully. For advice and assistance
or replacement parts please contact your relevant Kinetec office.
PRODUCT CODE:
PRODUCTDESCRIPTION:
Distributed by:
UK & ROI:
Kinetec Medical Products UK Ltd
Unit E Manawey Industrial Estate
13 Holder Road
Aldershot
GU12 4RH
United Kingdom
T: +44 (01252) 931980
E:
enquiries@kinetecuk.com
W:
www.kinetecuk.com
USER INSTRUCTIONS
M40SAB66M
MANOSPLINT SAFETY CUTTER
France & International:
Kinetec SAS
Zone Industrielle de Tournes
Rue Maurice Perin
F-08090 Tournes
France
T: +33 324 29 85 05
E:
contact@kinetec.fr
W:
www.kintetecinternational.com
Manosplint® Safety Cutter: User Manual
Safety Cutter. Every effort has been
®
USA & Canada:
Kinetec USA
W225N16708 Cedra Park Court
Jackson
WI 53037
USA
T: +1 (262) 677 1248
E:
sales@kinetecusa.com
W:
www.kinetecusa.com
Advertisement
Table of Contents
Summary of Contents for Manosplint M40SAB66M
- Page 1 USER INSTRUCTIONS Thank you for choosing the Manosplint Safety Cutter. Every effort has been ® made to bring you a precision engineered product with the promise of many years of valuable service. In order to obtain maximum benefit from your machine please read these instructions carefully.
-
Page 2: Table Of Contents
Installation Recommendations & Safety 3. Set-Up Blades and Blade Holder 4. Operation Cutting & Scoring Thermoplastics Medium Duty Blade Holder – Replacing Blades 5. Maintenance Cleaning & Lubrication Adjusting the Cutter Head Sliding Bearings 6. Other Information Warranty Manosplint® Safety Cutter: User Manual... -
Page 3: Safety & Preparation
Blades should be replaced or reversed when cutting becomes difficult because the blade has become blunt. The Medium Duty utility blades are double ended so can be switched round before disposal. (See Operation 4.2 for Replacing Medium Duty Blades) Manosplint® Safety Cutter: User Manual... -
Page 4: Operation
Thin materials (for example 1.6mm, 2.0mm) may be cut with one stroke of the Cutter Head. Thicker materials such as 2.4mm or 3.2mm may need to be scored 2 to 4 times before the final cut is performed. Manosplint® Safety Cutter: User Manual... - Page 5 Blade Guide. (We recommend placing the blade with the etched description ‘Medium Duty’ facing outwards so when it needs to be replaced, it can first be reversed to make use of both ends of the blade). Manosplint® Safety Cutter: User Manual...
-
Page 6: Maintenance
Should the Cutter Head Slideway require lubrication, use a silicon spray or silicon impregnated sponge. Please note! Do not use oil or solvents to lubricate or clean the cutter because the plastic components and bearings will be damaged. Manosplint® Safety Cutter: User Manual... -
Page 7: Adjusting The Cutter Head Sliding Bearings
Kinetec accepts no liability if the product is not assembled or used in the correct way, in accordance with instructions. 6. Other Information Warranty The Manosplint Safety Cutter has a 5 year warranty. Pack Contents The Safety Cutter is supplied with a pack of 100 of Medium Duty blades, 2mm Allen Key and User Instructions. - Page 8 Rue Maurice Perin Jackson Aldershot F-08090 Tournes WI 53037 GU12 4RH France United Kingdom T: +44 (01252) 931980 T: +33 324 29 85 05 T: +1 (262) 677 1248 enquiries@kinetecuk.com contact@kinetec.fr sales@kinetecusa.com www.kinetecuk.com www.kintetecinternational.com www.kinetecusa.com Manosplint® Safety Cutter: User Manual...
Need help?
Do you have a question about the M40SAB66M and is the answer not in the manual?
Questions and answers