Advertisement
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to
operate the power tool. Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools and accessories. Check for misalignment or
binding of moving parts, breakage of parts and any other condition
that may affect the power tool's operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and
the work to be performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and
grease. Slippery handles and grasping surfaces do not allow for safe
handling and control of the tool in unexpected situations.
5) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the
power tool is maintained.
b) If the replacement of the supply cord is necessary, this has to be done
by the manufacturer or his agent in order to avoid a safety hazard.
Case Trim Xpress Specifications:
29V DC , 11W 0.38A
AC ADAPTOR
Input:100-240V~ Output:29V DC
NOISE INFORMATION
A weighted sound pressure: 71 dB (A)
A weighted sound power:82 dB (A)
KpA&KwA: 3,0 dB (A)
Wear ear protection when sound pressure is over: 80dB (A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 62841-1:
Typical weighted vibration Vibration emission value ah <2,5 m/s2
Uncertainty K = 1,5 m/s²
3
Advertisement
