Lowrance TMR-1 User Manual

TMR-1 REMOTE CONTROLLER
USER GUIDE
*988-12652-001*
Parts included
A.
Remote controller
B.
AAA batteries, 2x
C.
Documentation
D.
Lanyard strap with carabiner clip
E.
Wrist strap
Technical specifications
Dimensions
Power
Temperature
Humidity
IP code
Communication
H: 73 mm (2.87"), W: 42 mm (1.65"), D: 22 mm (0.87")
2x AAA batteries
Operating: -20°C to +55°C (-4°F to +131°F)
Storage: -30°C to +70°C (-22°F to +158°F)
66°C, 95% RH, 18 hrs
IPx6, IPx7
Bluetooth, range ~30 m (98 ft)
Compliance statements
Declarations
The relevant declarations of conformity are available at: www.lowrance.com
Europe
Navico declare under our sole responsibility that the product conforms with the requirements of:
• CE under RED 2014/53/EU
United States of America
Navico declare under our sole responsibility that the product conforms with the requirements of:
• Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
!
Warning:
The user is cautioned that any changes or modifications not expressly
approved by the party responsible for compliance could void the user's authority to
operate the equipment.
¼ NOTE:
The equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that the interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that of the receiver is
connected
• Consult the dealer or an experienced technician for help
ISED Canada
This device complies with ISED (Innovation, Science and Economic Development) Canada's
license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may
not cause interference; and (2) This device must accept any interference, including interference
that may cause undesired operation of the device.
La traduction française de ce document est disponible sur le site Web du produit.
Australia and New Zealand
Navico declare under our sole responsibility that the product conforms with the requirements of:
• Level 2 devices of the Radiocommunications (Electromagnetic Compatibility) standard
2017
• Radiocommunications (Short Range Devices) Standards 2014
A
B
C
D
E