Troubleshooting - National Luna BMS-60010 User Manual

5 step fully automatic intelligent battery charger 6v/12v 1a
Table of Contents

Advertisement

Problem
Indication
Charger does
Indicator lights
not work
are not on
Charger has
no DC output
1
2
No charging
current
"Flashing"
6V
No charging
Phases
"Flashing"
Trouble Shooting
Possible Cause
a) Charger is not plugged in
b) Poor electrical connection
c) AC outlet is dead
a) Battery is connected with
reverse polarity poles
a) Battery may be defective /
excessive current draw
b) Battery may be severely sulfated
3
4 5
c) Charging is interrupted in Phase 1
d) Charging is interrupted in Phase 4
a) Charger is not connected to
battery for over 2 minutes
12V
b) Poor contact from charger to battery
c) MODE button is not pressed
a) Plug in
b) Check AC connections and make sure
mains is switched on
c) Check receptacle
a) Check DC connection between
charger and battery and make sure
they are not short circuited
a) Dead battery, it should be replaced
b) If battery cannot be de-sulfated, it
must be replaced
c) Battery cannot accept charge, it must be
replaced
d) Battery cannot retain charge, it must be
replaced
a) Charger is in energy save mode
b) Check if connectors are not greasy, corroded
and making a poor connection, as well as
loose or damaged connections
c) Select MODE
9
Solution

Advertisement

Table of Contents
loading

Related Products for National Luna BMS-60010

Table of Contents