I Battery Replacement; I Reference Standards - Vemer Memo DW E User Manual

BATTERY REPLACEMENT
When the battery charge level drops below a certain threshold, on
the first line of the display appear the words
replace the battery as soon as possible.
To replace the battery:
- disconnect the mains
- remove the battery slot cover, turning it anti-clockwise
- replace the battery and remount the cover, turning it clockwise
- connect the power supply
In order not to lose programming and the performed settings it is
necessary to make sure that no more than 60 seconds pass between
extracting the flat battery and inserting the new one.
Only use CR-2032 type batteries.
Dispose of the used batteries observing the laws
in force in relation to the disposal of hazardous
waste.
Compliance with Community Directives
. In this case 2006/95/EC (Low Voltage)
2004/108/EC (E.M.C.)
is declared in reference to the harmonized Standards
• EN 60730-2-7
- 30 -
User manual memo DW E
REFERENCE STANDARDS