Huawei VPC620 Manual page 8

Parameter Mode
STANDARD
HD-MODE
FULL
1080p 60
1080p 50
1080i 60
1080i 50
VIDEO
1080p 30
1080p 25
720p 60
720p 50
ON
FLIP
OFF
DVI
HD-VI
YPBPR
BOTH
the signals to the endpoint.
The video is displayed in standard mode.
If you select this option and set VEDIO to 720p 60, 1080p 30,
1080i 60, and 1080p 60, the actual video format are 720p 59.94
fps, 1080p 29.97 fps, 1080i 59.94 fps, and 1080p 59.94 fps,
respectively.
By default, HD-MODE is set to STANDARD, which is
recommended.
The video is displayed in full frame mode.
If you select this option, set VEDIO to 720p 60, 1080p 30,
1080i 60, or 1080p 60 based on the site requirements.
Select a video format.
Set FLIP to ON if the camera is installed in ceiling-mounted
mode.
To disable the video flip function, set FLIP to OFF (default
value).
Select a video output format. The default value is DVI. The
value BOTH indicates that both DVI and YPBPR are
supported.
8
Description