Advertisement
1.
Turn off power to light pole at circuit breaker.
3.
Remove pole cap and lower nut plate inside of pole until threaded holes align with proper moutning holes.
7.
Make connections as required by the wiring diagram.
8.
Rotate light engine assembly to closed position and secure using captive screws.
FIG 1
FIG 3
US LED
|
6807 PORTWEST DR
The installation must only be performed by a licensed electrician.
To prevent death, injury or damage to property, this product must be installed in accordance to National
Electrical Code (NFPA70) in the US or Canadian Electrical Code (CSA22.1) in Canada.
Disconnect power before installing the product or servicing it.
|
HOUSTON, TX 77024
FIG 2
FIG 4
|
T 866 972 9191
|
F 713 972 9393
QubeLot2
INSTALLATION INSTRUCTIONS
|
info@usled.com
|
www.usled.com
Advertisement
Table of Contents
Summary of Contents for US LED QubeLot2
- Page 1 QubeLot2 INSTALLATION INSTRUCTIONS The installation must only be performed by a licensed electrician. To prevent death, injury or damage to property, this product must be installed in accordance to National Electrical Code (NFPA70) in the US or Canadian Electrical Code (CSA22.1) in Canada.
- Page 2 QubeLot2 INSTALLATION INSTRUCTIONS WIRING DIAGRAMS LEGEND *VERIFY CORRECT POWER SUPPLY FACTORY INSTALLED FIELD INSTALL OPTION 1 OPTION 2 - PHOTOCELL US LED 6807 PORTWEST DR HOUSTON, TX 77024 T 866 972 9191 F 713 972 9393 info@usled.com www.usled.com...
- Page 3 QubeLot2 INSTALLATION INSTRUCTIONS WIRING DIAGRAMS LEGEND *VERIFY CORRECT POWER SUPPLY FACTORY INSTALLED FIELD INSTALL OPTION 3 - DYNADIMMER OPTION 4 - PHOTOCELL AND DYNADIMMER US LED 6807 PORTWEST DR HOUSTON, TX 77024 T 866 972 9191 F 713 972 9393 info@usled.com...
Need help?
Do you have a question about the QubeLot2 and is the answer not in the manual?
Questions and answers