Download Print this page

Aqua Essentials Borg & Overstrom B2 User Manual

Advertisement

Quick Links

User Guide
04
B2
Dispense Options
Chilled
Ambient
Contents
Component/Feature Overview
Operation
Functions & Controls
Basic Troubleshooting
General Safety
NOTE: This booklet to be left with
GB
Borg & Overström
GB
appliance following installation.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Borg & Overstrom B2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Aqua Essentials Borg & Overstrom B2

  • Page 1 User Guide Dispense Options Chilled Ambient Contents Component/Feature Overview Operation Functions & Controls Basic Troubleshooting General Safety NOTE: This booklet to be left with Borg & Overström appliance following installation.
  • Page 2 Component/ Feature Overview B3 - Major Components Dispense Taps Dispense Buttons Drip Tray Door Level Sensor Alarm Waste Tank...
  • Page 3 Hot Switch Chilled Switch IEC power socket Drain Port Water Inlet...
  • Page 4 Operation WARNING: On reservoir models the Carbon bag must be removed from the cold tank before connecting to power and water. Connect and turn on the water Dispense from all options (to Turn on the cold switch (located supply. Then connect the at the rear on the unit) to begin power supply.
  • Page 5 Functions & Controls Hot Models: Lift hot water lock button prior to dispense Controls Hot Water Lock Ambient or Hot Water Button Chilled Water Chilled Water Button Button Ambient or Hot Water Lock & Hot Water Button Hot Models: Press hot water lock button and then hot water button to dispense.
  • Page 6 General Safety WARNING: On reservoir models the Carbon bag must be removed from the cold tank before connecting to power and water. • Leave a space no less than 6 inches between the wall and dispenser. • Keep the machine away from sunlight, heat and moisture.
  • Page 7 Basic Troubleshooting Problem/Report Possible Cause Suggested Action No Water Dispensing Water supply turned off. Check that power supply, and all taps/ valves/ filters on the incoming water supply are fitted and are turned on. “Leak detector”” (if fitted) tripped off. Disconnect the power and water supply, check for leaks.
  • Page 8 For full distributor service manual visit: www.youraquaessentials.com Customer services: Email: rmiller@youraquaessentials.com Call: 1 (615) 942-7867 Fax: 1 (615) 345-0500 Aqua Essentials Telephone 1416 Antioch Pike, Suite 103 (615) 942-7867 Nashville, TN 37013 Email rmiller@youraquaessentials.com www.youraquaessentials.com Verson: 010219...

This manual is also suitable for:

Borg & overstrom b3