jetvision.de Active Diapason Antenna Quick Start Manual page 2

Box Contains (Art. 68200, Art. 69200):
• „Active Diapason" Antenna
• Antenna mount
• Bias Tee
• USB power supply cable
• Quick Start Guide
Additional Bundle Parts
(Art. 68140, Art. 69140):
• Antenna cable (cable length 20 m)
(Art. 68240):
• Antenna cable (cable length 20 m)
• ADS-B USB Dongle
• SMA/MCX-pigtail
• Small indoor antenna
(Art. 66077):
• Radarcape
• Antenna cable (cable length 20 m)
• Wall plug power supply
• 5 m network cable
• GPS antenna (cable length 5 m)
Quick
Start
Guide
Connections
1. Connect the „Active Diapason" Antenna with the antenna
cable to the Bias Tee, place the antenna as free and as high
as possible.
Make sure that the antenna has a conductive connection to
ground to avoid damage of Radarcape or Internet router!
2. Connect the Bias Tee to the receiver (e.g. Radarcape/ Dongle).
To connect the USB Dongle use the SMA/MCX-pigtail.
3. Connect the USB power supply cable to the Bias Tee and a
free USB port e.g. the front slot of the Radarcape.
4. Connect the receiver as specified in the receiver's manual.