Switching On The Appliance - BORETTI BV-83 Operating Instructions Manual

Switching On the Appliance

• Before switching on, place the appliance on upright position and wait at least three hours
without moving the appliance. This will give the refrigerant circuit time to settle and operate
efficiently.
• Clean the appliance thoroughly, especially in the interior, before use (See Cleaning and Maintenance).
• Installation of the appliance and electrical connections must be carried out by a qualified
technician, in accordance with the Installation Manual and local regulations.
• Installation procedure into the kitchen unit is given in the Installation Manual. This product is
intended to be used in proper kitchen units only.
• The appliance must be connected with a properly installed fused socket. Power supply (AC)
and voltage at the operating point must with the details on the name plate of the appliance
(name plate is located on the inside left of the appliance).
• Insert the plug into a socket with an efficient ground connection. If the socket has no ground
contact or the plug does not match, we suggest you to call an authorized electrician for
assistance.
• Manufacturer is not responsible for failure to complete the ground connection as described
in this booklet.
• There can be an odor when you first switch on the appliance. It will disappear after the
appliance starts to cool.