Download
Share
Print this page
Saris Bones RS Installation Instructions
  1. Manuals
  2. Brands
  3. Saris Manuals
  4. Automobile Accessories
  5. Bones RS
  6. Installation instructions

Saris Bones RS Installation Instructions

Hide thumbs Also See for Bones RS:
1
2
3
4

Advertisement

Quick Links

Download this manual
FINALLY – A
COMPANY THAT
LOVES BIKES AS
MUCH AS YOU DO.
Chances are, your bikes are just like
ours - your most valued possessions.
And if it has the Saris name on it,
nothing we build goes out the
door unless it's worth putting those
possessions on. Call it obsessive. Call
it eccentric. We just chalk it up to
caring a hell of a lot about creating
the last rack you'll ever need.
SUV Mount
A. ADJUST RACK TO VEHICLE.
1. Release ratchet cam lever.
Lever
Notch #1
Release ratchet cam
lever. Slide ratchet
into desired notch
position.
Bones RS

Installation Instructions

ATTENTION: Consult Saris Fit Guide before installation to obtain notch location on rack
for your vehicle. Available in box, at your local dealer, or at www.saris.com/bonesrs
Before installing carrier, clean all surfaces of vehicle which may come in contact with the
carrier or it's belts. Make sure all pads and hooks are free of any debris that could scratch
vehicle's fi nish. Clean all contact points periodically when using rack for prolonged periods.
Arms
Hatchback Mount
CAUTION
Anti-sway
hold-downs
Ratchet Assembly
Sedan Mount
2. Adjust ratchet into position.
Lever
Notch #1
Hold-downs
Cam Lever
Belts
Lock
Foot pads
Notch #1
Rubber Pads
Bottom Hooks
Lay the Bones RS fl at to adjust.
Lock ratchet cam lever in place.
Reference Saris Fit Guide for
notch position on your vehicle.
Example pictured: Cam lever is
locked into notch #4 (3 visible
notches below cam lever).
Notch #1 is at the bottom of the
rack. Saris Fit Guide available at
dealer or saris.com
Upper Hook

Advertisement

loading
Need help?

Need help?

Do you have a question about the Bones RS and is the answer not in the manual?

Questions and answers

Related Manuals for Saris Bones RS

Summary of Contents for Saris Bones RS

  • Page 1: Installation Instructions

    Installation Instructions CAUTION ATTENTION: Consult Saris Fit Guide before installation to obtain notch location on rack for your vehicle. Available in box, at your local dealer, or at www.saris.com/bonesrs Before installing carrier, clean all surfaces of vehicle which may come in contact with the carrier or it’s belts.
  • Page 2 3. Bottom Hook Placement 4. Top Strap Placement 5. Top Hook Attachment Place the bottom hooks under the trunk lip of the vehicle. (Some vehicles will require Pull out belt to desired length and attach Pull back on the yellow lock to an open trunk.) upper hook belts to the hinge line of the release upper hook belts.
  • Page 3 10. Lift cam lever on arm. 12. Raise arm above horizontal. 11. Slide arms to center position. Rotate arm upward and slide arm into appropriate notches as shown. (Note: Last bike cradle should be above horizontal. It should clearly be the high- est of the 3 positions.) Repeat for other arm and close cam levers.
  • Page 4 800-783-7257. attach carrier correctly to the vehicle, check its attach- 2) Bones RS should be locked to vehicle at all times. ment before each use, and inspect carrier parts for wear. 3) Bones RS is not intended for use with tandem or Carrier’s attachment to the vehicle is critical and beyond...