Troubleshooting - Sunbeam WF6500 Instruction Booklet

Troubleshooting

Problem
The unit is leaking
No water
is dispensed
LED display light
is not working
Help Line
If you have any additional questions about using the Water Filter and Chiller please call the
Sunbeam help line in Australia on 1 800 025 059. In New Zealand please call 0800 786 232.
12
Possible cause
The filter or water tank are not Remove the water tank and filter. Remove the
fitted correctly.
The filter or water
tank are not fitted correctly.
The filter may be
blocked.
What to do
clear rubber o-rings from the base of the unit and
fit back onto the filter cartridge. Wet the o-ring
seals and snap the filter back into place. With
a clean cloth, dry the seal on the unit, place
the water tank on the base and press down firmly.
Follow instructions above.
Replace the filter.
Contact Sunbeam Customer Service Help Line.
Note: The ready light for chilled water may flicker
on and off as chilled water is dispensed and if
ambient temperature increases.