Related Manuals for dewert okin ECO BETADRIVE ECO Series
Summary of Contents for dewert okin ECO BETADRIVE ECO Series
- Page 1 ECO BETADRIVE ECO Installation Instructions (Translation of the original installation instructions)
-
Page 3: Foreword
ECO BETADRIVE ECO Foreword Foreword Document revision history Version Date Modification, change 03/2015 04/2018 Fixing screws defined 07/2019 Ratings plate, disposal, graphics (insatallation), technical specifi- cations, Disclaimer and exclusion of liability DewertOkin is not responsible for damage resulting from: failure to observe these instructions, ... -
Page 4: Table Of Contents
Table of contents ECO BETADRIVE ECO Table of contents Foreword Document revision history Disclaimer and exclusion of liability Creation of a complete operating instruction manual for the entire end product Notice for customers in EU nations Table of contents General Information Configurations About these installation instructions Safety notices within the installation instruction and the operating instructions for the entire... -
Page 5: General Information
ECO BETADRIVE ECO General Information General Information Configurations The ECO BETADRIVE ECO drive is run in several different configurations. The ECO BETADRIVE ECO name, as used here, also includes: ECO BETADRIVE ECO-BZ ECO BETADRIVE ECO-BS1 ECO BETADRIVE ECO-BS2 About these installation instructions These installation instructions must be followed closely in order to install this drive successfully and safely in the end product. -
Page 6: Conventions Used
General Information ECO BETADRIVE ECO Conventions used Notices which do not relate to safety are indicated in these instructions with a triangle: Triangular notice symbol Safety notice explanations CAUTION CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moder- ate injury. -
Page 7: Safety Instructions
ECO BETADRIVE ECO Safety Instructions Safety Instructions Proper and Intended Usage The ECO BETADRIVE ECO is meant to be installed in a furniture product. It provides motor adjustment capabilities for movable parts. It should be used in conjunction with suitable fitting brackets and mechanics. ... -
Page 8: Ratings Plate
Safety Instructions ECO BETADRIVE ECO Ratings plate The ratings plate shown is an example; the specifications for your drive may differ from this illus- tration. Figure 2 Ratings plate example ECO BETADRIVE ECO-BZ ECO BETADRIVE ECO-BS1 Model name ECO BETADRIVE ECO-BS2 xxxxx Article number 24-29V... -
Page 9: Description
ECO BETADRIVE ECO Description Description The ECO BETADRIVE ECO is an electrically driven motor that is responsible for moving the end product in a linear direction. This adjustment is created by the up and down movement of a a ctuat- ing block. -
Page 10: Installation Options For The End Product
Description ECO BETADRIVE ECO Installation options for the end product 3.2.1 Installation for the guideance profile For the ECO BETADRIVE ECO, there are two installation options for the guidance profile: Profile cap Profile cap and mounting bracket Figure 4 Installation options on the guidance profile A Profile cap with screwed mounting B Profile cap... - Page 11 ECO BETADRIVE ECO Description 3.2.2 Installation at the motor housing For the ECO BETADRIVE ECO, there are two installation options for the motor housing: Clevis Clevis and mounting bracket Figure 5 Installation options at the motor housing A Clevis with screwed mounting bracket on B Clevis the ECO BETADRIVE ECO 81417 3.0...
- Page 12 Description ECO BETADRIVE ECO 3.2.3 Connection options There are different power supply options for the ECO BETADRIVE ECO: LSP plug, 5-pole plug, Motor controller cable. Figure 6 Connection options A Connection at the side of the motor housing B Connection at the side of the profile cap C LSP plug D 5-pole plug...
-
Page 13: Technical Specifications
ECO BETADRIVE ECO Technical Specifications Technical Specifications Input voltage 24 V DC - 29 V DC Current consumption at rated load max. 4.0 A, depending on version (refer to the ratings plate) Permitted push force max. 1500 N, depending on version (refer to the rat- ings plate) Permitted pull force max. - Page 14 Technical Specifications ECO BETADRIVE ECO 14,5 Ø 23 23 min. 157 Figure 7 Dimensions of the ECO BETADRIVE ECO (in mm), min. installation dimension: 157 mm 81417 2.0...
-
Page 15: Installation
ECO BETADRIVE ECO Installation Installation Safety notices to observe during installation Basic safety rules must be followed in order to ensure that the end product can be continually op- erated in a safe manner. The following rules must be observed while using the end product and while installing the drive Avoiding fatigue fractures ... -
Page 16: Installation Procedure
Installation ECO BETADRIVE ECO Installation procedure NOTICE Carry out the assembly of the drive when the application is in no-load position. In its final position, the drive must be either fully retracted or extended. Damage to the drive is prevented only in in no-load position and a safe assembly is ensured. First example: Profile cap with mounting bracket / clevis with mounting bracket. - Page 17 ECO BETADRIVE ECO Installation Second example: Clevis Figure 9 Installing the drive (example) A Clevis B Adaption mechanism of the end product C Mounting bolt D Safety clip E A ctuating block F Self-tapping screw 6,3 x max.25mm Ø (DIN EN ISO 1478) G Bracket for securing the drive In the following example, installation of the ECO BETADRIVE ECO into the end product is shown using.
- Page 18 Installation ECO BETADRIVE ECO 5.2.1 Electrical connection CAUTION Danger of crushing injury! The electrical components may be connected or disconnected only when the mains power and the battery plug (when present) are disconnected. This ensures that no uncontrolled movement can be triggered. ...
-
Page 19: Note: Operating Information
ECO BETADRIVE ECO Note: Operating information Note: Operating information The installation instructions do not contain all information required for the safe operation of the end product. They only describe the installation and operation of the drive as components (as defined in the Machinery Directive as a "partially assembled piece of machinery"). -
Page 20: Maintenance And Cleaning
Maintenance and cleaning ECO BETADRIVE ECO Maintenance and cleaning Maintenance The ECO BETADRIVE ECO is maintenance free. Cleaning Clean the ECO BETADRIVE ECO as needed using a dry antistatic cloth. NOTICE Always disconnect the mains power plug from the drive system (and the battery plug if pre- sent) before you start to clean the unit! ... -
Page 21: Disposal
ECO BETADRIVE ECO Disposal Disposal Packaging material The packaging material should be sorted into recyclable components and then disposed of in ac- cordance with the appropriate national environmental regulations (in Germany according to the re- cycling law KrWG from 01.06.2012; internationally according to the EU Directive 2008/98/EC (Waste Framework Directive WFD as of 12.12.2008)). -
Page 22: Declaration Of Incorporation/Installation
Declaration of Incorporation Einbauerklärung nach Anhang II der EU-Maschinenrichtlinie According to Appendix II of the EU Machinery 2006/42/EG Directive 2006/42/EC Der Hersteller The manufacturer: DewertOkin GmbH Weststraße 1 32278 Kirchlengern Deutschland - Germany erklärt hiermit, dass nachstehend beschriebene declares that the incomplete machines described unvollständigen Maschinen below ECO BETADRIVE ECO-BZ... -
Page 23: Eu Declaration Of Conformity
EU Declaration of Conformity EG-Konformitätserklärung Nach Anhang IV der EMV-Richtlinie 2014/30/EU In compliance with Appendix IV of the EMC-Directive 2014/30/EU Nach Anhang IV der EU-Niederspannungsrichtlinie In compliance with Appendix IV of the LVD-Directive 2014/35/EU 2014/35/EU Nach Anhang VI der RoHS-Richtlinie 2011/65/EU In compliance with Appendix VI of the EU RoHS Directive 2011/65/EU (incl. - Page 24 Additional information ECO BETADRIVE ECO UL962 CSA C22.2 No.68...
- Page 25 DewertOkin GmbH Weststraße 1 32278 Kirchlengern, Germany Phone: +49 (0)5223/979-0 Fax: +49 (0)5223/75182 http://www.dewertokin.de Info@dewertokin.de ID-Nr.: 81417...
Need help?
Do you have a question about the ECO BETADRIVE ECO Series and is the answer not in the manual?
Questions and answers