Using Your Penguin Waffle Maker - Sunbeam Woddles WM3100 Instruction/Recipe Booklet

Using your Penguin Waffle Maker

1.Insert the 3 pin plug into a 230/240 volt
power outlet and turn the power on.
2.Allow your penguin waffle maker to pre-
heat until the 'Power ON Light' goes out.
This indicates that the cooking plates
have reached the correct temperature for
cooking.
3.For best results, lightly spray the cooking
plates with a cooking oil spray before
using. This will assist in the removal of the
waffles after cooking.
4.Pour approximately 2 rounded tablespoons
of mixture into the centre of the pre-heated
cooking plates and using a plastic spatula;
push the mixture into the hands and feet
of the penguin moulds to ensure that the
plates are well covered.
6
5.Gently close the lid. Do not force lid down
tightly as this may cause the mixture to run
off the cooking plates.
6.Allow to cook for approximately 3 minutes
or until golden.
7.To remove waffles, always use a plastic or
wooden spatula. Never use a sharp object
or metal, as this will damage the non-stick
surface of the cooking plates.