Faro ZIVA User's Manual And Installation page 20

3.2 POSITIONING
3.2.1 SUSPENDED INSTALLATION
Using an accessory kit (not supplied), it is possible to install the light suspended from the ceiling.
The positioning with respect to the chair remains unchanged (see point 3.2 fig.3)
For all installation information, refer to the instructions in the accessory kit.
3.3 CEILING INSTALLATION
The ZIVA lamp is supplied complete with ceiling installation elements.
INCLUDES:
• Lamp
• Safety sheet
• 2 Ziva lamp fixing brackets
• 2 Safety cables
• 6 fischer with Ø 6 mm screw
3.4 INSTALLATION PROCEDURE
1. Determine the size of the positioning axis of the magnets on the Ziva lamp.
2. Drill the ceiling with a Ø6mm drill bit
Insert the plugs.
Fix the 2 fixing brackets to the ceiling, keeping the position dimensions of the magnets
detected before, in order to allow the magnets the complete support.
3. Secure the safety cables.
4. Connect the power cable.
5. Apply the lamp to the brackets (magnetic contact)
Make sure the magnets are gripped on the brackets.
6. The ZIVA lamp is fixed to the ceiling.
Fig. 3
19