Subscribe to Our Youtube Channel
Summary of Contents for Muller Elektronik DUAL-Antenna
- Page 1 Installation Instructions DUAL-Antenna Version: V4.20180614 3030248960-02-EN Read and follow these operating instructions. Keep these operating instructions in a safe place for later reference.
- Page 2 Company details Document Installation Instructions Product: DUAL-Antenna Document number: 3030248960-02-EN Original language: German Copyright © Müller-Elektronik GmbH & Co.KG Franz-Kleine-Straße 18 33154 Salzkotten Germany Phone: ++49 (0) 5258 / 9834 - 0 Fax: ++49 (0) 5258 / 9834 - 90 Email: info@mueller-elektronik.de...
-
Page 3: Table Of Contents
Table of contents Table of contents For your safety Basic safety instructions Intended use Layout and meaning of warnings Disposal Product description Assembly instructions Attaching the GPS receiver on the main bar Installing the main bar on the roof 3.2.1 Installation with standard angle bracket 3.2.2 Installation with additional components... -
Page 4: For Your Safety
For your safety Basic safety instructions For your safety Basic safety instructions Please read the following safety instructions carefully before using the product for the first time. ▪ Do not make any unauthorized modifications to the product. Unauthorized modifications or use may impair safety and reduce the service life or operability of the unit. -
Page 5: Layout And Meaning Of Warnings
For your safety Layout and meaning of warnings Layout and meaning of warnings All safety instructions found in these Operating Instructions are composed in accordance with the following pattern: WARNING This signal word identifies medium-risk hazards, which could potentially cause death or serious physical injury, if not avoided. -
Page 6: Product Description
Product description Product description The DUAL-Antenna system with a second GPS receiver allows working with centimeter accuracy even at extremely low speeds. The lowest possible speed is 80m/h. To work with the system, you must add a second receiver to your existing system consisting of a DGPS/GLONASS receiver SMART-6L and a GSM modem. -
Page 7: Assembly Instructions
Assembly instructions Attaching the GPS receiver on the main bar Assembly instructions Attaching the GPS receiver on the main bar Procedure Step Procedure Be sure to measure the width of the roof of your tractor. The main bar may not protrude later on. The possible length of the main bar is 1m to 1.5m. -
Page 8: Installing The Main Bar On The Roof
Assembly instructions Installing the main bar on the roof Step Procedure Please note that you must install the GPS receiver with RTK activation on the left side in the driving direction. Installing the main bar on the roof To install the main bar on the roof, you can either use the supplied angle brackets or attach the main bar individually. -
Page 9: Installation With Additional Components
Assembly instructions Installing the main bar on the roof - Position the angle bracket and re-tighten the screws. 3. Make sure that the screws are sealed after tightening. 4. Center the main bar on the angle brackets. The main bar may not protrude over the edge of the roof. -
Page 10: Connecting The Components
Assembly instructions Connecting the components Connecting the components NOTICE Kink damage to the antenna cable The antenna cable can become damaged if it is bent during installation. ◦ Do not bend the antenna cable. Procedure To connect the components: You have installed the holding bar with the GPS receivers. ... -
Page 11: List Of Accessories
List of accessories DUAL-Antenna – Components Item number Item name 3030248960 DUAL-Antenna upgrade kit with DGPS/GLONASS receiver SMART-6L, junction box and roof bracket for 2 GPS receivers 3030247607 DGPS/GLONASS receiver SMART-6L for DUAL-Antenna systems 3130248960 Roof bracket for 2 GPS receivers with fastening material...
Need help?
Do you have a question about the DUAL-Antenna and is the answer not in the manual?
Questions and answers