Related Manuals for Katadyn MyBottle 8018087
Summary of Contents for Katadyn MyBottle 8018087
- Page 1 Katadyn MyBottle Portable Water Purification System Katadyn ViruPur Replacement Cartridge (Model #8018087)
-
Page 2: How It Works
The Katadyn Bottle purifier offers a convenient alternative to pump-style water filters. Because it is designed for personal use, the Katadyn Bottle purifier is not suitable for situations when large volumes of water must be treated. -
Page 3: Key Components
KEy COMPONENTS Cushioned mouth piece Bottle cap with integral carry loop Carbon Postfilter ViruPur Cartridge with Bottle Straw integrated glass-fiber Prefilter and removable plastic sleeve Figure 1 IMPORTaNT NOTES 1. In order to be purified, water must pass through the ViruPur Cartridge. The flow rate is slower than an ordinary sports water bottle in order to ensure complete purification. -
Page 4: Normal Operation
Fill line Figure 2 3. Flush system (IMPORTaNT!) Before first use, flush system to remove harmless carbon dust from the Postfilter. Fill bottle with water. Install bottle cap with assembled cartridge on bottle and tighten. Squeeze bottle tightly with both hands until water runs clear. -
Page 5: Cartridge Installation
CaRTRIDgE INSTaLLaTION The MyBottle ViruPur microbial purification cartridge is for use with MyBottle water purification system. Each replaceable ViruPur Replacement Cartridge will treat up to 100 liters (26 gallons) of water. CHECKINg THE LIFESPaN OF THE MyBOTTLE VIRuPuR MICROBIaL PuRIFICaTION CaRTRIDgE The MyBottle comes with a cartridge life counter. -
Page 6: Cleaning And Storage
CHaNgINg THE MyBOTTLE VIRuPuR MICROBIaL PuRIFICaTION CaRTRIDgE After 100 liters (26 gallons) or when bottle is hard to squeeze, use the following steps to change the MyBottle purification cartridge: a. Remove the cartridge/bottle cap from the bottle. b. Remove the Carbon Postfilter and ViruPur Cartridge from the cap. Discard cartridge components in trash receptacle. - Page 7 1 part ethanol and 1 part water and let it soak for 30 minutes to prevent bacterial growth. Remove. 4. Wash and dry bottle. Store empty bottle with cap on (without cartridges installed). 5. Allow all filter components to dry thoroughly. 6.
-
Page 8: Product Registration
Should your Katadyn MyBottle water purification system prove defective within two years from the date of purchase, return it to the Katadyn retailer from whom it was purchased. If you do not receive a satisfactory resolution, contact Katadyn Customer Relations for service assistance. - Page 9 Contacto Internacional Katadyn Products Inc. Birkenweg 4 8304 Wallisellen, Switzerland Phone: +41 44 839 21 11 info@katadyn.ch www.katadyn.com...