Download  Print this page

Lenovo EAM-400H User Manual

Atx intel core i7/i5/i3 industrial motherboard.
Hide thumbs

Advertisement

EAM-400H
ATX Intel® Core™ i7/i5/i3
Industrial Motherboard
User's Manual
Manual Rev.:
Revision Date:
Leading EDGE COMPUTING
1.00
July 31, 2013

Advertisement

Table of Contents

   Related Manuals for Lenovo EAM-400H

No related manuals

   Summary of Contents for Lenovo EAM-400H

  • Page 1 EAM-400H ATX Intel® Core™ i7/i5/i3 Industrial Motherboard User’s Manual Manual Rev.: 1.00 Revision Date: July 31, 2013 Leading EDGE COMPUTING...
  • Page 2 Revision History Revision Release Date Description of Change(s) 1.00 2013/7/31 Preliminary release Revision History...
  • Page 3: Preface

    Environmental Responsibility Lenovo is committed to fulfill its social responsibility to global environmental preservation through compliance with the Euro- pean Union's Restriction of Hazardous Substances (RoHS) dire- ctive and Waste Electrical and Electronic Equipment (WEEE) directive.
  • Page 4 EAM-400H. Chapter 3, Getting Started: Illustrates how to install components on the EAM-400H such as CPU, heatsink, and memory modules. Chapter 4, Driver Installation: Provides information on how to install the EAM-400H device drivers.
  • Page 5 EAM-400H Conventions Take note of the following conventions used throughout this manual to make sure that users perform certain tasks and instructions properly. Additional information, aids, and tips that help users perform tasks. NOTE: NOTE: Information to prevent minor physical injury, component dam- age, data loss, and/or program corruption when trying to com- plete a task.
  • Page 6 This page intentionally left blank. Preface...
  • Page 7: Table Of Contents

    EAM-400H Table of Contents Revision History..............ii Preface ..................iii List of Figures ................ ix List of Tables ................xi 1 Introduction ................ 1 Overview................1 Features ................2 Specifications ................ 3 Block Diagram ............... 5 Functional Description ............6 Power Consumption ..............
  • Page 8 Important Safety Instructions ..........37 Getting Service ..............39 viii Table of Contents...
  • Page 9: List Of Figures

    EAM-400H List of Figures Figure 1-1: EAM-400H Block Diagram ..........5 Figure 1-2: EAM-400H Board Dimensions ........11 Figure 2-1: EAM-400H Rear I/O Layout ........... 13 Figure 2-2: EAM-400H Board Layout ..........17 List of Figures...
  • Page 10 This page intentionally left blank. List of Figures...
  • Page 11: List Of Tables

    Table 1-1: EAM-400H General Specifications ........3 Table 1-2: Core™ i7-3770 Power Consumption ....... 8 Table 1-3: Core™ i3-3220 Power Consumption ....... 9 Table 1-4: Pentium® G2120 Power Consumption ......10 Table 2-1: EAM-400H Board Layout Legend ........18 List of Tables...
  • Page 12 This page intentionally left blank. List of Tables...
  • Page 13: Introduction

    LGA1155 package to deliver a scalable high performance platform for a wide array of industrial applications. The EAM-400H supports 22nm process CPUs at up to 3.4 GHz with integrated graphics and memory controllers, Direct Media Interface (DMI) and Flexible Display Interface (FDI) connectivity to the Intel®...
  • Page 14: Features

    1.2 Features ATX form factor (305 mm x 218 mm) ► Supports 3rd Generation Intel® Core™ i7/i5/i3 and ► Pentium® processors in LGA1155 package Integrated Intel® HD Graphics ► One PCIe x16 slot, two PCIe x4 slots (with PCIe x1 signals), ►...
  • Page 15: Specifications

    Rear I/O • 2x Gigabit Ethernet RJ45 ports • 4x USB 2.0 ports • 1x VGA connector • 1x DVI-D port • 2x PS2 keyboard/mouse ports • 3x audio jacks (line-in, line-out and mic-in) Table 1-1: EAM-400H General Specifications Introduction...
  • Page 16 Form Factor ATX Industrial Motherboard Dimensions 305 mm x 218 mm (L x W) Operating Temp. 0ºC to 60ºC Storage Temp. -20ºC to 80ºC Rel. Humidity 10% to 90% non-condensing Safety CE, FCC Class A Table 1-1: EAM-400H General Specifications Introduction...
  • Page 17: Block Diagram

    10 USB 2.0 Ports Realtek 8111E Dual Realtek 8111E 4 SATA Ports at 3.0Gb/s Super I/O Fintek COM3-6 Realtek GPIO Nuvoton HD Audio BIOS 81216AD Expansion HD Audio NCT6776F KB/MS ALC892 COM1-2 DIO17-32 DIO1-16 Figure 1-1: EAM-400H Block Diagram Introduction...
  • Page 18: Functional Description

    1.5 Functional Description Processor Support The EAM-400H is an industrial motherboard supporting the 3rd generation Intel® Core™ processor family (Intel® Core™ i7/i5/i3) in LGA1155 socket. An integrated memory controller supports dual channel DDR3 1333/1600 MHz and Intel® HD Graphics is integrated onboard the CPU.
  • Page 19 EAM-400H Serial ATA The EAM-400H provides four SATA 3 Gb/s ports. Hardware monitoring A built-in, proactive hardware monitoring system in the Super I/O monitors the CPU temperature, CPU fan speed, and voltage levels to prevent overheating and/or component damage, effect timely failure detection, and ensure stable supply of current for critical components.
  • Page 20: Power Consumption

    1.6 Power Consumption Test Configuration 2x Transcend 8GB DDR3 1600 DIMM Memory (CL11 SEC K4B4G0846B-HYK0 8GB) Graphics Intel® Graphics Media Accelerator HD (integrated) Storage Seagate ST9160412AS Momentus 7200.4 160GB Power Supply Sunpower SPX-6500P1 500W Intel® Core™ i7-3770 Processor (8M Cache, 3.40 GHz) Power Req.
  • Page 21: Table 1-3: Core™ I3-3220 Power Consumption

    EAM-400H Intel® Core™ i3-3220 Processor (3M Cache, 3.30 GHz) Power Req. +12V +3.3V Total Current (A) 0.64 0.92 0.38 — Power (W) 11.04 1.25 15.49 Idle Load Power Req. +12V +3.3V Total Current (A) 1.15 0.56 0.50 — Power (W) 5.75...
  • Page 22: Table 1-4: Pentium® G2120 Power Consumption

    Intel® Pentium® Processor G2120 (3M Cache, 3.10 GHz) Power Req. +12V +3.3V Total Current (A) 0.64 0.72 0.38 — Power (W) 8.64 1.25 13.09 Idle Load Power Req. +12V +3.3V Total Current (A) 1.21 0.57 0.48 — Power (W) 6.05 6.84 1.58 14.47...
  • Page 23: Mechanical Drawings

    EAM-400H 1.7 Mechanical Drawings Dimensions in mm Figure 1-2: EAM-400H Board Dimensions Introduction...
  • Page 24: Package Contents

    Driver DVD ► Quick Reference Guide ► The EAM-400H must be protected from static discharge and physical shock. Never remove any of the socketed parts except at a static-free workstation. Use the anti-static bag shipped with WARNING: the product to handle the board. Wear a grounded wrist strap when installing and/or servicing.
  • Page 25: Hardware Information

    EAM-400H Hardware Information 2.1 Rear I/O Connectors KB/MS COM1 DVI-D Audio Figure 2-1: EAM-400H Rear I/O Layout PS/2 Mouse Port (green) Pin # Signal Function MSDATA Mouse Data not connected Ground Power Clock not connected PS/2 Keyboard Port (purple) Pin #...
  • Page 26 Serial Port Connector (COM1) Pin # RS-232 DCD, Data Carrier Detect RXD, Receive Data TXD, Transmit Data DTR, Data Terminal Ready GND, ground DSR, Data Set Ready RTS, Request to Send CTS, Clear to Send RI, Ring Indicator DVI-D Connector Pin # Signal Pin #...
  • Page 27 EAM-400H VGA Connector. Signal Name Pin # Pin # Signal Name Green Blue VCC pull-up VCC pull-up DDC2B DATA HSYNC VSYNC DDC2B CLK LAN Port (RJ-45) Refer to the tables below for the LAN port pin and LED definitions. 10BASE-T/...
  • Page 28 USB Connectors Pin # Signal Name USB- USB+ Audio I/O port The three-jack audio I/O supports Line-In, Line-Out, and Mic-In functions. The blue Line-In jack connects to an audio source such as a CD player. The green Line-Out port connects to a speaker or headphone, while the pink Mic-In jack connects to a microphone.
  • Page 29: Board Layout

    EAM-400H 2.2 Board Layout CPU_FAN JDIO1 ATX12V1 JLPC1 SYS_FAN PCIEX16_1 PCI1 PCIEX1_1 PCIEX1_2 CLRTC1 PCI2 PCI3 AAFP1 SPI_CN1 PCI4 USB78 USB910 USB56 F_PANEL Figure 2-2: EAM-400H Board Layout Hardware Information...
  • Page 30: Table 2-1: Eam-400h Board Layout Legend

    PCI Express x1 slots PCIEX16_1 PCI Express x16 slot PCI1~4 PCI slots PSON1 AT/ATX Mode Jumper SATA1~4 SATA 3 Gb/s Connector SPI_CN1 SPI Pin Header SYS _FAN System Fan Connector USB56/78/910 USB 2.0 Pin Headers Table 2-1: EAM-400H Board Layout Legend Hardware Information...
  • Page 31: Onboard Connectors & Jumpers

    EAM-400H 2.3 Onboard Connectors & Jumpers Front Panel Audio Pin Header (AAFP1) Pin # Signal Pin # Signal MIC2_L AGND MIC2_R FP_PRES# LIN2_R SRTN1 SENSE A LIN2_L SRTN2 ATX 12V Power Connector (ATX12V1) Pin # Signal +12V DC +12V DC...
  • Page 32 Serial Port Connectors - RS-232 (COM2~6) Pin # Signal Function Data Carrier Detect Data Set Ready Receive Data Request to Send Transmit Data Clear to Send Data Terminal Ready Ring Indicate Ground Serial Port Connector - RS-422/485 (COM6) Pin # RS-422 RS-485 DATA-...
  • Page 33 EAM-400H CPU Fan Connector (CPU FAN) Pin # Signal Fan power (+12V) Fan Tachometer Fan Speed Control System Panel Pin Header (F_PANEL) Pin # Signal Function Pin Group WDSPK Speaker signal Chassis Speaker Power Ground Key Lock KEYLOCK Keyboard lock...
  • Page 34 Digital IO Connector (JDIO1) Pin # Signal Pin # Signal SIO_GPIO0 DIO_GPIO0 SIO_GPIO1 DIO_GPIO1 SIO_GPIO2 DIO_GPIO2 SIO_GPIO3 DIO_GPIO3 SIO_GPIO4 DIO_GPIO4 SIO_GPIO5 DIO_GPIO5 SIO_GPIO6 DIO_GPIO6 SIO_GPIO7 DIO_GPIO7 SIO_GPIO8 DIO_GPIO8 SIO_GPIO9 DIO_GPIO9 SIO_GPIO10 DIO_GPIO10 SIO_GPIO11 DIO_GPIO11 SIO_GPIO12 DIO_GPIO12 SIO_GPIO13 DIO_GPIO13 SIO_GPIO14 DIO_GPIO14 SIO_GPIO15 DIO_GPIO15 SMB_CLK_RESUME...
  • Page 35 EAM-400H SATA Connectors (SATA1~4) Pin # Signal SPI Pin Header (SPI_CN1) Pin # Signal Pin # Signal +3V ROM F_SPI_CS# F_SPI_CLK F_SPI_MISO F_SPI_MOSI SPI_HOLD# System Fan Connector (SYS_FAN) Pin # Signal Fan Power (+12V) Fan Tachometer USB 2.0 Pin Headers (USB56/78/910)
  • Page 36: Jumpers

    2.4 Jumpers Clear CMOS (CLRTC1) The CMOS RAM data contains the date / time and BIOS setting information. CMOS is powered by the onboard button cell battery. To erase the CMOS RAM data: 1. Power down and disconnect power from the system. 2.
  • Page 37 EAM-400H AT/ATX Mode Jumper (PSON1) Pin # Signal PSON_AT FRP_PANSWUN Status Connection JCLRT_C2 AT Mode 1 – 2 ATX Mode 2 – 3 (default) Hardware Information...
  • Page 38 This page intentionally left blank. Hardware Information...
  • Page 39: Getting Started

    This chapter provides information on how to install components on the EAM-400H motherboard. 3.1 Installing the CPU The EAM-400H supports an Intel® Core™ i7/i5/i3 or Pentium® processor in an LGA1155 socket. Disconnect all power to the board before installing a CPU to prevent damaging the board and CPU.
  • Page 40 2. Raise the locking arm to unlock the load plate. 3. Lift the load plate to uncover the socket. 4. Remove the plastic protective cover from the socket. Note the locations of the alignment keys (A) and Pin 1 indicator (B). Do NOT touch socket contacts.
  • Page 41 EAM-400H 5. Hold the CPU using thumb and forefinger as shown. Position the CPU over the socket, matching the notches on the sides of the CPU with the alignment keys on the socket (A). The golden triangle on the CPU must be positioned at the corner of the socket with the Pin 1 indi- cator as shown (B).
  • Page 42 7. Gently lower the load plate. Make sure the front edge of the plate is under the screw as indicated. 8. Lower the locking arm and fasten it to the retention tab (A). The load plate should be locked underneath the screw as shown (B).
  • Page 43: Installing The Cpu Fan And Heatsink

    EAM-400H 3.2 Installing the CPU Fan and Heatsink The CPU requires a chassis with an airflow inlet and maximum internal ambient temperature of 60° C. A specially-designed CPU fan and heatsink must be installed before using the moth- CAUTION: erboard. Failure to install a CPU fan and heatsink may damage the system host board and/or the CPU.
  • Page 44: Installing Memory Modules

    3.3 Installing Memory Modules The EAM-400H supports up to 16 GB of DDR3 1066/1333 MHz (2nd Gen Intel® Core™) or 1333/1600 MHz (3rd Gen Intel® Core™) memory modules in two DIMM sockets. A DDR3 module has a 240-pin footprint compared to the legacy 184-pin DDR DIMM.
  • Page 45 EAM-400H To install a memory module: 1. Locate the DIMM sockets on the motherboard. 2. Press the socket’s retaining clips outward to unlock. 3. Align the memory module on the socket making sure that the notch matches the break on the socket.
  • Page 46 4. Insert the module firmly into the slot until the retaining clips snap back inwards and the module is securely seated. Getting Started...
  • Page 47: Driver Installation

    EAM-400H Driver Installation This chapter provides information on how to install the EAM-400H device drivers under Windows XP. The device drivers are located in the following Lenovo All-in-One CD directories: Chipset X:\CHIP Display X:\VGA Ethernet X:\LAN Audio X:\AUDIO .NET X:\OTHERS...
  • Page 48 This page intentionally left blank. Driver Installation...
  • Page 49 EAM-400H Important Safety Instructions For user safety, please read and follow all instructions, WARNINGS, CAUTIONS, and NOTES marked in this manual and on the associated equipment before handling/operating the equipment. Read these safety instructions carefully. ► Keep this user’s manual for future reference.
  • Page 50 Never attempt to fix the equipment. Equipment should only ► be serviced by qualified personnel. A Lithium-type battery may be provided for uninterrupted, backup or emergency power. Risk of explosion if battery is replaced with one of an incorrect type. Dispose of used batteries appropriately. WARNING: Equipment must be serviced by authorized technicians ►...
  • Page 51 Getting help and service If you need help, service, technical assistance, or more infor- mation about Lenovo products, you will find a wide variety of sources available from Lenovo to assist you. Information about your computer and preinstalled software, if any, is available in the documentation that comes with your computer.

Comments to this Manuals

Symbols: 0
Latest comments: