Table of Contents
Advertisement
Operation Manual / TPR56-F + TPR61-F
8 Disassembly and assembly / 8.5 Removing cartridge group
8.5.2 Dismantling the compressor casing
© Copyright 2018 . All rights reserved.
Rotate the compressor casing and set it down on an underlay.
u
NOTICE
Ensure that the underlay does not shift.
Make certain that the compressor casing rests only on the flange (F)!
u
Check underlay and adjust if necessary.
u
Remove the screw (72002).
u
Remove the diffuser (79000).
u
Pull out and remove the wall insert (77000) using a swivel lifting
u
eye (90230) and plug bolt (90865).
Remove O-rings (77005 & 77006).
u
HZTL2490_EN
Revision D
May 2018
Advertisement
Table of Contents
