USER GUIDE PAW6MLWF Thank you for purchasing the Pawple™ 6-Meal Automatic Pet Feeder. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.
Get Started with your New Automatic Feeder Install Batteries 1. Turn the green knob on the lid from the lock ( ) to the unlock ( ) position to release it. 2. Remove the lid and flip it upside down. You will see two separate compartments, one large and one small.
Page 5
Turn on the Feeder & Set the Time 1. Lift the green cover on the control panel and press the power button. If you have trouble with the display cover, try pressing the slightly raised green square on the cutout around the display panel and lifting up. 2.
Setting Meal Sizes 6. For each meal, you can choose whether the feeder should open a single compartment or multiple compartments. This is indicated by the word BOX on the right side of the LCD display screen. Use the up and down arrows to cycle between one (1), two (2), or three (3) compartments to be opened.
5. If the LED light is flashing slowly, but the SERVED counter has not reached 6, this indicates that the batteries need to be changed. After changing the batteries (refer back to “Install Batteries” on page 3), you will need to turn the device back on and set the time. You will not need to reprogram the scheduled meals;...
• Battery Capacity: 2800mAh Questions or problems? Contact us! support@pawplepets.com 1-833-665-2184 PAWPLE, the PAWPLE logo, PETS ARE PEOPLE, TOO!, and the BAR CODE DEVICES are trademarks of C&A IP Holdings, LLC, in the U.S. All other products, brand names, company names, and logos are trademarks of their respective owners, used merely to identify their respective products, and are not meant to connote any sponsorship, endorsement or approval.