Installation Instructions; Electrical Requirements - Sunbeam SBCR91BSL Owner's Use And Care Manual

Compact refrigerator

Hide thumbs

Table Of Contents

Table of Contents

Available languages

IMPORTANT SAFETY INFORMATION

ELECTRICAL REQUIREMENTS

This appliance must be grounded. In the event of an

electrical short circuit, grounding reduces the risk of electrical

shock by providing an escape wire for the electrical

current.

This appliance is equipped with a cord having a grounding

wire with a grounding plug. The plug must be plugged into an

outlet that is properly installed and grounded.

WARNING

Improper use of the grounding plug can result in a risk of

electric shock. Consult a qualified electrician or serviceman

if the grounding instructions are not completely understood,

or if doubt exists as to whether the appliance is properly

grounded.

LOCATION

Remove exterior and interior packaging, wipe the outside

thoroughly with a soft dry cloth and the inside with a wet, luke-

warm cloth. Avoid placing the unit in a narrow recess or near

any heat source, direct sunlight, or moisture. Let air circulate

freely around the unit. Keep the rear of the refrigerator 5

inches away from the wall.

Location

1) Select a place with a level floor.

2) Allow 5 inches of space between the back of the

refrigerator and any adjacent wall.

3) Avoid direct sunlight and heat. Direct sunlight may affect

the acrylic coating. Heat sources nearby will cause

higher electricity consumption.

4) Avoid damp places. Too much moisture in the air will

cause frost to form very quickly on the evaporator, and

your refrigerator will have to be defrosted more

frequently.

READ ALL SAFETY INFORMATION BEFORE USING

SAVE THESE INSTRUCTIONS