Advertisement
Parts List, Installation Guide, & Maintenance
Before you begin installation, please consult your local building code and/or pool code to ensure this product
is suitable for your application. Periodic maintenance and testing to ensure proper operation is recommended.
Parts List:
Gate Jamb Striker
Euro cylinder with 2 keys for
BL3400 & BL3430DKO-ECP
models
BL3400 & 3430DKO-ECP
Instructions
(1) Socket Machine Screw Plug x 2
(2) Socket Machine Screw x 2
(3) Spacer x 2
(4) Latch Bolt Finishing Insert x 1
Spare Tumblers
2 x coded
2 x blank
Tweezers x 1
Allen Wrench x 2
1 @ 3mm for Key Pack
1 @ 2.5mm for Latch Bolt Adjusting
Factory Pre-set
Code Card
Code Change Key
for Recoding
Advertisement
Table of Contents
Summary of Contents for Snug Cottage Hardware Borglocks BL3400
- Page 1 BL3400 & 3430DKO-ECP Parts List, Installation Guide, & Maintenance Instructions Before you begin installation, please consult your local building code and/or pool code to ensure this product is suitable for your application. Periodic maintenance and testing to ensure proper operation is recommended. Parts List: (1) Socket Machine Screw Plug x 2 (2) Socket Machine Screw x 2...
- Page 2 These instructions should be thoroughly explained and left with the owner of the lock for reference by them or other service personnel at a later date. Before commencing installation, check that all parts listed above are accounted for and the lock is working correctly.
- Page 3 Deactivating the on the Door Code Change Function: In the event where you know you will never need to change the code of the lock or in cases where you wouldn’t want someone else to change the code without your knowledge, it is possible to disable the “on the door”...
- Page 4 BL3430DKO-ECP (double sided keypad): It is not necessary to change the location of the keypads on the 3430 double sided model unless you feel it may be defeated from the outside if you leave the machine screw heads exposed. If so, use a 3mm Allen wrench to remove the two (2) machine screws from the keypad of the lock. The machine screws bolt through the lock body and attach to the back of the opposing keypad on the other side.
- Page 5 Installation instructions: 1. Establish the handing required for your lock installation and change if necessary following the instructions above in “How to Change the Handing of your Lock”. 2. Enter the code and test the lock several times to ensure proper operation before proceeding. 3.
- Page 6 These procedures can be carried out as needed when lock is sticky or code is accepted intermittently. If you experience any problems when installing or changing the code on this lock, please contact: Snug Cottage Hardware Marysville Michigan, USA and London, Ontario, Canada 1-800-637-5427 www.snugcottagehardware.com...
Need help?
Do you have a question about the Borglocks BL3400 and is the answer not in the manual?
Questions and answers