Advertisement
ACCESSORIES AND HARDWARE
Hoffman cannot assure the safety or
effectiveness of any alterations or additions
not made by Hoffman Enclosures Inc.
Lock kits and latch kits are available for field
or factory installation on many types of
Hoffman enclosures. Lock kits provide
key−locking capabilities. Latch kits permit
rapid access to enclosure interiors while
retaining the oil tight and dust tight features.
Louver plate kits provide ventilation in
enclosures where internal heat is a problem.
Floor stand kits for converting wall mounting
enclosures to floor mounting are available for
field or factory installation on single door
NEMA 12 and NEMA 4 enclosures.
Drip shield kits are available for field or
factory installation on single door and double
door NEMA 12 enclosures.
Electrical interlocks provide a positive
internal safety lockout on electrical
enclosures while the enclosure contents are
energized.
Swing−out panel kits provide a means of
mounting gauges, switches, pilot lights and
other components near the front of the
enclosure.
OTHER HOFFMAN PRODUCTS
S NEMA 1, NEMA 3R, NEMA 4, NEMA 4X,
NEMA 9, and NEMA 12 enclosures
S Oil tight JIC boxes and troughs.
S Oil tight wireway and lay−in wireway
S NEMA 1 wireway
S Oil tight pushbutton enclosures
S Cutout boxes, pull boxes, and transformer
cabinets
S Non−metallic enclosures
S Stainless steel enclosures and boxes
− 2 −
Safety Lockouts protect personnel and
equipment by enabling multiple padlocks to
be installed on a de−energized switch.
Touch−up paint is used to repair the finish of
enclosures and panels.
Window kits are available for many types of
Hoffman enclosures.
Corrosion inhibitors protect interior
components of enclosures, wireway,
consoles, etc. from corrosion. There are no
coatings, oils, or greases to apply.
Hole seals are used to seal extra conduit
openings, pushbutton holes, cutouts, etc.
against dust, dirt, oil, and water.
Terminal kit assemblies provide an easy
method to mount terminal blocks in many
types of Hoffman enclosures.
Folding Shelves can be used to support
instruments and test equipment.
Pedestals are used to provide floor mounting
at a working height for small to medium size
enclosures.
S Aluminum enclosures and boxes
S Console cabinets
S Custom−built enclosures of all types
S Instrument and electronic enclosures
S Environmental control products
S EMI/RFI shielded enclosures
S Wiring duct
S Modified Standard Enclosures
S Co−Developed Enclosures
E 2004 Hoffman Enclosures Inc.
87569073
Advertisement
