Advertisement
◆ Determine where the parking lock will be installed. Make marks of the screws' positions on
the floor according to the mounting holes on the bottom of the parking lock.
◆ Moving parking lock away from the installation location.
◆ Drill 3 expansion bolt holes in the ground (Hole size:Φ12mm, Depth:50MM)
◆ Return the parking lock back to the installation location, and fix it in place with the M8
expansion bolts.
◆ Place the batteries into their receiver.
◆ Put the top cover back on the parking lock and lock it.
Battery Use
1. Not suitable for rechargeable batteries.
2. Do not reverse the battery polarity.
3. Do not heat or disassemble the batteries. They may explode.
Maintenance
Regularly clean the components on the surface of the parking lock to ensure the parking lock is
always dry and clean.
Trouble Shooting
If you: Press the APP control buttons, but the parking lock won't work.
◆ Check and confirm whether it is has low battery power (The indicator light does not light)
◆ Please check that you have put the batteries in the correct way. Pull out the batteries, and
check for the + and – symbols to indicate which way the batteries should be placed.
◆ If there is an audio response when you press APP control buttons, but the parking lock won't
work, you should check whether there is an abnormal sound in the motor drive and whether
the parking lock has been damaged or compromised.
◆ For further information, feel free to contact us.
Packing List
NO.
1
2
Expansion bolt
3
Key for the top cover
4
ITEM
Parking Lock
Batteries
QTY
1PCS
3PCS
2PCS
Not/Inc.
Advertisement
