Advertisement
Never operate this underwater light for more than 10 seconds unless it is totally submerged in water. Without total submersion, the
light assembly will get extremely hot, which may result in serious burns or in breakage of the lamp or lens. This may result in serious
injury to pool/spa users, installers, or bystanders, or in damage to property.
9. Fill the fountain until the light is completely submerged in water before operating it for more than 10 seconds. Entire
fixture must be at least 2 inches below water level.
10. Turn on main switch or circuit breaker, as well as the switch that operates the light itself, to check for proper
operation. Refer to Operating Instructions of the light.
1.85"
Fountain Niche Kit Dimensions for Small Lights
Section II. Technical Data
A. Replacement Parts
Item P/N
Description
No.
1 570011 Fountain Niche Screw Kit
WARNING
7.25" DIA
SAVE THESE INSTRUCTIONS
12.00" DIA
Fountain Niche Kit Dimensions for Large Lights
3
2.70"
1
Advertisement
