Page 2
1. Introduction The LogTag USB Desktop Interface model LTI-WiFi serves as the data transfer link between LogTag Analyzer software and your Logger. • Used with all models that establish PC communication via the 3 contact pins at the rear of your Logger.
Page 3
• On the next page click the button “Download Now”. The WiFi Configuration Wizard will now be downloaded.
Page 4
• Start the WiFi Configuration Wizard by double clicknig the downloaded file. Select the “Easy WiFi Setup” and click “Next”.
Page 5
• On the next screen, the WiFi Configuration Wizard will scan for your LTI-WiFi Interface Cradle. Click on “next when your Interface Cradle has been found.
Page 6
Once you are logged into LogTag Online, please click “register device”. Here you can register your LTI-WiFi Interface Cradle. When you use a WiFi Interface Cradle, it’s not necessary to register your Logger you are using. Enter a description and the Interface Cradle serial number (the number after...
Page 7
• Click register to complete the process. Your LTI-WiFi Interface Cradle is now ready to upload data to the LogTag Online cloud service. 3. Download the results • Connect the LTI-WiFi Interface Cradle to your computer. Once the Interface Cradle has been connected to your LogTag Online account, the blue LED will turn on.
4. ADDITIONAL INFORMATION LED Signals - Network LED’s SIGNAL SEQUENCE WiFi not configured or off No LED signal Not connected to WiFi Slow blinking of red LED’s Connected to WiFi, but no cloud server connection* Red LED is solid on Connected to cloud server , link not established* Slow blinking of blue LED’s Connected to cloud server, link established...