Assembling Your Cafe Juice - Sunbeam Cafe Juice JE7600 Instruction Booklet

Assembling your Sunbeam
Cafe Juice
Before Use
After unpacking your Sunbeam Cafe Juice™,
we recommend that you dissemble the unit
before using for the first time. Wash all parts
except the motor base in hot soapy water.
Rinse and dry immediately.
Important: Always ensure your juicer is
unplugged from the power outlet when not
in use, during assembling or whilst removing
parts.
1.Set the motor base on a dry, level surface.
For convenience when juicing, have the
control switch facing you – figure 1.
Figure 1
2.Place the juice collector / bowl onto the
top of the motor base – figure 2.
Figure 2
™
3.Position the stainless steel blade and
filtering basket onto the motor drive shaft
and push down until firmly in
place, the arrows indicate the correct
alignment position of the basket – figure 3.
4.Place the juicer cover onto the juice
collector / bowl, with the feed chute
positioned over the stainless steel blade
and filtering basket and push into position
– figure 4.
Figure 3
Figure 4
7