Summary of Contents for UpTone Audio EtherREGEN
- Page 1 User Guide Rev. 1.02, November 2019 E t h e r R E G E N UPTONE AUDIO LLC • MARIPOSA • CALIFORNIA • U.S.A. U s e r G u i d e Phone 1-209-966-4377 • uptoneaudio.com...
-
Page 2: Technical Highlights
EtherREGEN are as sophisticated and costly as the rest of the design. We use 12 of the world’s lowest-noise, lowest-impedance Going from port-to-port on the ‘A’ side of EtherREGEN is already better integrated voltage regulators—the famous Linear Technology than most any other switch, but crossing our Active Differential Isolation LT3045 and LT3042. -
Page 3: Installation And Use
Across the ADIM™, at the other end of the EtherREGEN, is a single 100Mbps copper Ethernet port. This is the ‘B’-side port. - Page 4 You may wonder why the AC>DC adapter supplied with the modem is assigning IP addresses to devices on your local area EtherREGEN is rated at a high 4.8A. It is because UpTone uses the same network. adapter for our popular UltraCap LPS-1.2 linear power supply, and...
- Page 5 AC mains ground. When our supply is used to power the EtherREGEN it is NOT necessary to use the Ground RJ45 ports on the ‘A’-side of the EtherREGEN. This has nothing at all to do with data or signal quality. In fact, this recommendation is not even screw.
- Page 6 Since we already utilize a very advanced one re-clocking techniques we are using (in dual domains) is to produce the 4 clock lines in the EtherREGEN, it was easy for us to to make most all of the upstream stuff not matter. Other include provision for connection of an external 10MHz clock.