Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for paladin FFC LAF5647
Summary of Contents for paladin FFC LAF5647
- Page 1 Click Here To View Item at www.GapPower.com...
- Page 2 OPERATOR’S AND PARTS MANUAL POWER RAKE SERIAL NUMBER: ___________________ Manual Number: MR25661 Models: LAF5647, LAF5671, LAF5689; LAF5648, LAF5672, LAF5690; MODEL NUMBER: ___________________ LAF5660, LAF5676, LAF5694; LAF5696, LAF5697 & LAF5698 Date: March 2014 Rev. 2 800-456-7100 I www.paladinattachments.com 2800 N. Zeeb Rd., Dexter, MI. 48130, United States of America Copyright ©...
- Page 3 Notes...
-
Page 4: Table Of Contents
TABLE OF CONTENTS PREFACE ....................... 2 OWNER AND OPERATOR SAFETY INFORMATION SAFETY STATEMENTS ................3 SAFETY PRECAUTIONS ................3-5 SAFETY SIGNS .................... 6-7 SPECIFICATIONS ....................8-9 MOUNTING ......................10 HYDRAULIC CONNECTION .................. 11 SET UP ........................12 OPERATION ......................13 MAINTENANCE ..................... -
Page 5: Preface
Based on the uncertainty of the prime mover, operator, and job site, it is impossible to get precise machine and operator sound pressure levels, or vibration levels for this attachment.” NOTE: A list of all Paladin Patents can be found at http//www.paladinbrands.com/patents.asp. MR25661... -
Page 6: Safety Statements
SAFETY STATEMENTS THIS SYMBOL BY ITSELF OR WITH A WARNING WORD THROUGHOUT MANUAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING YOUR PERSONAL SAFETY OR THE SAFETY OF OTHERS. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH. DANGER THIS SIGNAL WORD IS USED WHERE SERIOUS INJURY OR DEATH WILL RESULT IF THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY. - Page 7 GENERAL SAfETy PRECAUTIONS GENERAL SAFETY PRECAUTIONS WARNING! PROTECT AGAINST fLyING DEbRIS always wear proper safety glasses, goggles, or a face shield when driving pins in or WARNING! PROTECT AGAINST FLYING DEBRIS out, or when any operation causes dust, flying debris, or any other hazardous mate- Always wear proper safety glasses, goggles or a face shield when driving pins in or rial.
-
Page 8: Safety Precautions
GENERAL SAFETY PRECAUTIONS WARNING! DO NOT MODIFY MACHINE OR ATTACHMENTS Modifications may weaken the integrity of the attachment and may impair the function, safety, life, and performance of the attachment. When making repairs, use only the manufacturer’s genuine parts, following authorized instructions. Other parts may be substandard in fit and quality. - Page 9 SAFETY SIGN LOCATIONS The diagram on this page shows the location of the decals used on the FFC Power Rake. The decals are identified by their part numbers, with reductions of the actual decals located on the following page. Use this information to order replacements for lost or damaged decals. Be sure to read all decals before operating the attachment.
-
Page 10: Safety Signs
SAFETY SIGNS PART #50-10017 WARNING! READ MANUAL PART #50-0724 WARNING! HIGH PRESSURE FLUID PART #RDL3123 WARNING! PIVOTING ATTACHMENT PART #RDL3100 WARNING! STAND CLEAR PART #RDL3314 DANGER! ROTATING SHAFT MR25661... -
Page 11: Specifications
PRIME MOVER SPECIFICATIONS IMPORTANT Exceeding any of the maximum recommended prime mover specifications CAN result in damage to this product and WILL void all FFC warranties. DESCRIPTION SPECIFICATIONS Weight of Prime Mover without Power Rake 11,000 lbs. maximum Operating Capacity of Prime Mover's Loader 4,500 lbs. - Page 12 MR25661...
-
Page 13: Mounting
POWER RAKE MOUNTING WARNING! READ MANUAL PRIOR TO INSTALLATION Improper installation, operation, or maintenance of this equipment could result in serious injury or death. Operators and maintenance personnel should read this manual, as well as all manuals related to this equipment and the prime mover thoroughly before beginning installation, operation, or maintenance. -
Page 14: Hydraulic Connection
POWER RAKE HYDRAULIC CONNECTION READ AND UNDERSTAND ALL SAFETY STATEMENTS Read all safety decals and safety statements in all manuals before beginning any Power Rake hydraulic connection. Know and obey all OSHA regulations, local laws, and other professional guidelines for your operation. Know and follow good work practices when assembling, maintaining, repairing, mounting, removing, or operating this equipment. -
Page 15: Set Up
POWER RAKE SETUP SAFETY FIRST! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS BEFORE BEGINNING ANY POWER RAKE SETUP! 1. Roller The roller and power rake [front to back] should be positioned level with the ground. To adjust, raise or lower the gauge wheels and/or use the prime mover’s tilt cylinder. For a 3-point mounting, the upper link needs to be adjusted in or out. -
Page 16: Operation
POWER RAKE OPERATION POWER RAKE OPERATION WARNING! Failure to obey the following procedures could result in death or serious injury. SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS (pages 2–5 of this manual) BEFORE BEGINNING ANY POWER RAKE • Never lift this product above (a) the operator’s eye level or (b) to a height OPERATION where visibility is obstructed, whichever is lower. - Page 17 POWER RAKE MAINTENANCE GENERAL INFORMATION Regular maintenance is the key to long equipment life and safe operation. Maintenance requirements have been reduced to the absolute minimum. However, it is very important that these maintenance functions be performed as described below. Park your prime mover on a level surface with this product properly attached.
-
Page 18: Maintenance
MAINTENANCE MAINTENANCE RECORD Use this log to record maintenance performed on the attachment. Maintenance Procedure Performed Date Comments Performed MR25661... -
Page 19: Service
POWER RAKE SERVICE IMPORTANT When replacing parts use only factory approved replacement parts. Manufacturer will not claim responsibility for use of unapproved parts or accessories and/or other damages as a result of their use. Removing Wire, Twine, Weeds, etc. that are Wrapped Around the Roller Park your prime mover on a level surface with this product properly attached. -
Page 20: Storage
POWER RAKE STORAGE SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS BEFORE BEGINNING ANY POWER RAKE STORAGE Disconnect hydraulic hoses from prime mover. Install dust plugs or couple hoses together, as appropriate. Disengage your Power Rake from the prime mover. Be sure your Power Rake rests in a stable position for storage. -
Page 21: Power Rake Parts Illustration
POWER RAKE PARTS ILLUSTRATION 59 23 35 60 19 MR25661... -
Page 22: Power Rake Parts List
POWER RAKE PARTS LIST LAF5647 LAF5671 LAF5689 LAF5648 LAF5672 LAF5690 ITEM QTY. 48" 72" 90" DESCRIPTION varies (2) 13-50860 Motor Mount 13-50861 Axle Shaft Assembly (for 48" model) Not Used Not Used varies (2) 13-50865 Motor Plate 13-50866 Wheel Arm 13-51048 Not Used Not Used... - Page 23 POWER RAKE PARTS ILLUSTRATION 59 23 35 60 19 MR25661...
- Page 24 POWER RAKE PARTS LIST LAF5647 LAF5671 LAF5689 LAF5648 LAF5672 LAF5690 ITEM QTY. 48" 72" 90" DESCRIPTION P760300 Tapered Roller Bearing Cone LAF9715 Pin 1.25" x 6.5" (1) .281 Hole M10463 Axle Bolt .75"-16 x 9.5" Fine Thread Hex M16107 Wheel and Tire Assembly M16108 Axle Spacer Long M16109...
- Page 25 POWER RAKE PARTS ILLUSTRATION 59 23 35 60 19 MR25661...
- Page 26 POWER RAKE PARTS LIST LAF5647 LAF5671 LAF5689 ITEM QTY. 48" 72" 90" DESCRIPTION LAF5619 Link Arm LAF5639 Mounting Frame LAF5641 Back Plate LAF5643 Bushing P101020 Grade 5 Hex Head Cap Screw .63" x 5" Grade 5 Lock Nut .63" RHW7603 RHW8148 Clevis Pin .63"...
-
Page 27: Pto Power Rake Parts Illustration
PTO POWER RAKE PARTS ILLUSTRATION MR25661... -
Page 28: Pto Power Rake Parts List
PTO POWER RAKE PARTS LIST LAF5660 LAF5676 LAF5694 ITEM QTY. 56" 72" 90" DESCRIPTION 13-50412 PTO Gear Box Guard Weldment Hydraulic Elbow 90° 6MB-6MJ P261350 LAF4516 Hydraulic Cylinder 2.5" x 7.5" x 1.25" Shaft (Cylinder Seal Kit = LAF4017) LAF5602 Pivot Pin LAF5613 Right Side Shield... - Page 29 PTO POWER RAKE PARTS ILLUSTRATION MR25661...
- Page 30 PTO POWER RAKE PARTS LIST LAF5660 LAF5676 LAF5694 ITEM QTY. 56" 72" 90" DESCRIPTION LAF9433 Top Link Bushing P126250 Top Link Bushing P760500 Bearing Race Tapered Roller Bearing Cone P760300 LAF9715 Pin 1.25" x 6.5" 07-3022 Grade 8 Hex Head Cap Screw .25" x 2" varies (4) RHW1105 Grade 5 Hex Head Cap Screw .31"...
- Page 31 PTO POWER RAKE PARTS ILLUSTRATION MR25661...
- Page 32 PTO POWER RAKE PARTS LIST FOR MANUAL ANGLE MODELS (See list below -- which replace the cylinder.) LAF5696 LAF5697 LAF5698 ITEM QTY. 56" 72" 90" DESCRIPTION LAF2818 Position Tube (male) LAF2817 Position Tube (female) RHW8133 Rue Ring Cotter Pin .5" Heavy RHW8150 Clevis Pin .5"...
- Page 33 HYDRAULIC ANGLE KITS PARTS ILLUSTRATION & LISTS EXISTING HOSE KIT # LAF5640 FOR 48" POWER RAKE FROM B TO REAR FROM A PTO DRIVE HYDRAULIC KIT # LAF5650 ANGLE KIT # LAF5695 FOR 60" & 72" POWER RAKES LAF5640 LAF5650 LAF5695 ITEM QTY.
-
Page 34: Warranty
Period, which is the period that begins on the fi rst to occur of: (i) the date of initial purchase by an end-user, (ii) the date the product is fi rst leased or rented, or (iii) the date that is six (6) months after the date of shipment by Paladin Light Construction as evidenced by the invoiced shipment date (the “Commencement Date”) and ends on the date...