Download Print this page

PDi -772HE-IND Instructions Manual

Individual input port central power supply

Advertisement

Quick Links

Better Solutions Are Within Reach
WARNING: To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or
moisture.
WARNING: To prevent injury, this apparatus must
be securely attached to the wall in accordance with
the installation instructions.
WARNING: Do not install this equipment in a
confined space such as a cabinet, drop ceiling, or
similar space.
CAUTION: Do not block ventilation openings,. Install
in accordance with the manufacturer's instructions.
REGULATORY INFORMATION
FCC PART 15
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy, and if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this
equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one
or more of the following measures:
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
MODEL NUMBER:
PDI-772HE-IND
Individual Input Port Central Power Supply
®
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receive
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
Modifications
Any changes or modifications made to this device
that are not expressly approved by PDi may void the
user's authority to operate the equipment.
Cables
Connections to this device must be made with
shielded cables with metallic RFI/EMI connector
hoods to maintain compliance with FCC Rules and
Regulations.
Healthcare Grade Power Supply
The PDi Healthcare series television is specifically
designed for installation and use in a healthcare
environment in which installation is limited to a
nonhazardous area in accordance with the National
Electrical Code, ANSI/NFPA70.
Document Number:
PD196-181R3
Page 1 of 12

Advertisement

loading
Need help?

Need help?

Do you have a question about the PDI-772HE-IND and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PDi PDI-772HE-IND

  • Page 1 PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664...
  • Page 2 Copyright 2012 by PDi Communication System, Inc PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664...
  • Page 3: Important Safety Instructions

    This supply does not require periodic cord or plug is damaged, liquid has been spilled maintenance other than cleaning. or objects have fallen PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664...
  • Page 4: Theory Of Operation

    TV location. The supply provides low voltage AC power and RF cable TV signal along a connecting coax cable to a patient room television. Unique to the PDI- 772HE-IND are individual RF Inputs allowing a dedicated set top satellite box, a cable box, or other similar RF device to be directed to one specific television.
  • Page 5 Page 5 of 12 Guidelines The PDI-772HE-IND is a specialized power supply designed to power low-voltage AC small screen televisions and is intended for use in a hospital, a nursing home, a medical-care center, or a similar healthcare facility in which installation is limited to a non-hazardous area in accordance with the National Electrical Code ANSI/ NFPA70.
  • Page 6: Wall Installation

    (not supplied) at each of the mounting hole locations. Expose 1/2 inch of thread on each bolt. 4. Center the supply over the 1/4-20 bolts. Tighten. PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664...
  • Page 7 The PDI-772HE-IND is uniquely designed to provide individual inputs for each output, resulting in each TV viewing a different signal. The PDI-772HE-IND provides a means to insert the output of an individual cable box or satellite box onto a coax line power TV system.
  • Page 8 5. Replace the ventilation cover. Tighten the (2) cover screws. 6. Use a permanent marker to identify each cable on the LOCATION label next to the circuit breaker field. PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664...
  • Page 9 Better Solutions Are Within Reach Page 9 of 12 Operating Operation of the PDI-772HE involves powering the unit, verifying the TV powers “on” and checking the powered TV for proper signal. Power Supply Powering 1. Lift the plug keeper and insert the IEC power cord plug into the AC jack located on the bottom of the power supply.
  • Page 10: Troubleshooting

    Station or set top box problem. Tune to another channel. • Ground loop caused by poor grounding. Check set top box connections and grounds. • Wrong coax cable used - see CATV Wiring. PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664...
  • Page 11 THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA, AND CANADA. If this product is found to be defective, PDi will repair or replace defective parts at no charge to the original owner during the warranty period. Such repair and replacement services shall be rendered by PDi or a PDi Authorized Servicer during normal business hours.
  • Page 12 MODEL NUMBER: Document Number: PD196-181R3 PDI-772HE-IND Individual Input Port Central Power Supply ® Better Solutions Are Within Reach Page 12 of 12 PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664...