Advertisement
Table of Contents
INSTALLATION INSTRUCTIONS
WARNING!
Fixtures must be grounded and installed in accordance with the National Electrical Code and all local codes. Failure to
do so may increase the RISK OF PERSONAL INJURY, PROPERTY DAMAGE, FIRE AND DEATH. Install and use where burnouts do
not cause a hazard and use only in environments for which the product is specifically marked.
WARNING!
This product contains chemicals known to the State of California to cause cancer, birth defects, and/or other reproductive
harm. Thoroughly wash hands after installing, handling, cleaning, or otherwise touching this product.
CAUTION!
Follow ALL luminaire recommendations, product markings, instructions, restrictions and warnings regarding lumninaire
operation and burning position. Luminaire label shows electrical and environmental requirements.
All electrical work must be done by a qualified electrician.
Turn off electric power to all affected circuits and allow to cool before servicing.
A regularly scheduled maintenance program should be established to retain optimum light output and reduce heat retention. Dusting
with a soft, clean, dry cloth is normally sufficient. Any accumulation of dust or dirt should be removed regularly from the lens. Use only a
mild soapy solution, DO NOT use alkaline or acid cleaners.
Carefully read these instructions before installing product. If you do not understand these instructions, before starting any work, contact
your Hubbell Lighting distributor or techsupport@hubbell-ltg.com or (864) 678-1000
Give instructions to facility owner/manager for future reference.
FRESNO SQ.
701 Millennium Boulevard Greenville, SC 29607 (864) 678-1000
SAVE THESE INSTRUCTIONS
FRESNO RD.
TEMPE SQ.
www.spaulding-ltg.com
TEMPE RD.
Advertisement
Table of Contents
Summary of Contents for Spaulding Lighting FRESNO SQ.
- Page 1 INSTALLATION INSTRUCTIONS SAVE THESE INSTRUCTIONS WARNING! Fixtures must be grounded and installed in accordance with the National Electrical Code and all local codes. Failure to do so may increase the RISK OF PERSONAL INJURY, PROPERTY DAMAGE, FIRE AND DEATH. Install and use where burnouts do not cause a hazard and use only in environments for which the product is specifically marked.
- Page 2 INSTALLATION INSTRUCTIONS SAVE THESE INSTRUCTIONS LED BOLLARD LIGHT FIXTURES (FN1, FN2, TMS, TMR) WARNING: DISCONNECT POWER BEFORE INSTALLATION OR SERVICING READ INSTRUCIONS CAREFULLY - FAILURE TO DO SO COULD RESULT IN PERSONAL INJURY. RETAIN INSTRUCTIONS FOR SERVICING. FIXTURE INSTALLATION 1. UNPACK LUMINAIRE AND CHECK FOR DAMAGE. 2.
Need help?
Do you have a question about the FRESNO SQ. and is the answer not in the manual?
Questions and answers