Summary of Contents for Concierge ACMGWM10
-
Page 1: Installation Instructions
Installation Instructions ACMGWM10-10 Window Mount Bracket +61 3 9012 6126 conciergedisplays.com.au ... -
Page 2: Tools Required
The following instructions should be used to install the Concierge Displays ACMGWM10 window mount bracket. Tools required Preparation and Notes • Isopropyl wipe Ensure that there is sufficient access • Fine tip permanent marker to the top part of the window frame •... - Page 3 Step 3 Place the bracket back in the desired location. With a marker, mark the desired location that is to be drilled to for the data or DC power cable to pass through to the display. There is a cut out on the bracket in the middle of the 4 mounting holes.
- Page 4 M4 washers provided. Step 7 The window mount is now ready for the Concierge Room Booking Display to be mounted. Slide on the display, connect the required cables and screw on the 2 x M5 screws provided with a hand held screw driver. The screw points are located at the base of the bracket.
Need help?
Do you have a question about the ACMGWM10 and is the answer not in the manual?
Questions and answers