Freedom Showers SCS-090090-PWS Installation Instructions

Contour shower shelf

Advertisement

INSTALLATION INSTRUCTIONS
APFSCS-090090-PWS
Contour Shower Shelf
PLEASE READ THESE INSTALLATION INSTRUCTIONS THOROUGHLY PRIOR TO INSTALLING THIS SHOWER SHELF
IMPORTANT: THIS PRODUCT SHOULD ONLY BE INSTALLED BY QUALIFIED AND TRAINED PERSONNEL
FAILURE TO FOLLOW THESE INSTRUCTIONS COULD LEAD TO IMPROPER INSTALLATION OF THE SHOWER SHELF,
STRUCTURAL AND/OR WATER DAMAGE TO THE WALL AND IN -WALL SUPPORT STRUCTURES, AND/OR SERIOUS
BODILY INJURY IN USE. IN ADDITION, ALL WARRANTIES, EXPRESS OR IMPLIED, WILL BE NULL & VOID DUE TO
IMPROPER INSTALLATION OF THIS PRODUCT. SEACHROME CORPORATION DOES NOT ASSUME ANY LIABILITY
FOR DAMAGE RESULTING FROM SERVICES PERFORMED BY OTHERS, OR FAULTY INSTALLATION, MISUSE OR
MISAPPLICATION OF GOODS.
THE PERFORMANCE OF THIS PRODUCT IS SIGNIFICANTLY IMPACTED BY THE STRENGTH OF THE WALL TO WHICH
IT IS ATTACHED.
TO ASSURE PROPER AND SAFE INSTALLATION, THIS SHOWER SHELF MUST BE INSTALLED INTO A MINIMUM 2"
THICK, SOLID WOOD, IN-WALL BACKING MATERIAL. MAKE CERTAIN IN -WALL BACKING COMPLIES WITH ALL
LOCAL BUILDING CODE REQUIREMENTS.
DO NOT EXCEED 50 POUNDS OF FORCE IN USE OF THIS PRODUCT.
1. Remove the Contour Shower Shelf (SCS-090090-PWS) from the shipping carton.
FREE OM
Page 1
www.FreedomShowers.com
Showers
1-877-947-7769
of 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SCS-090090-PWS and is the answer not in the manual?

Questions and answers

Summary of Contents for Freedom Showers SCS-090090-PWS

  • Page 1 THICK, SOLID WOOD, IN-WALL BACKING MATERIAL. MAKE CERTAIN IN -WALL BACKING COMPLIES WITH ALL LOCAL BUILDING CODE REQUIREMENTS. DO NOT EXCEED 50 POUNDS OF FORCE IN USE OF THIS PRODUCT. 1. Remove the Contour Shower Shelf (SCS-090090-PWS) from the shipping carton. FREE OM Page 1 www.FreedomShowers.com...
  • Page 2 INSTALLATION INSTRUCTIONS SCS-090090-PWS Contour Shower Shelf 2. Locating the Contour Shower Shelf in the desired position. Locate and ensure the area where the shelf is to be mounted is reinforced with 2” solid wood in-wall backing. Walk-in Shower Determine desired shelf height. Using the shelf as a template, align the hole centerlines with the 2”...
  • Page 3 INSTALLATION INSTRUCTIONS SCS-090090-PWS Contour Shower Shelf Proceed cautiously through the following steps in this installation process to avoid drilling into in-wall water supply lines. All mounting points must fasten into structural wood backing, minimum 2” thickness. Avoid electrical and/or plumbing behind the wall, and where possible drill through tile – not through grout.
  • Page 4 INSTALLATION INSTRUCTIONS SCS-090090-PWS Contour Shower Shelf Step #2 Fill the clearance holes on the mounting surface with silicone to ensure a water-tight seal will be created at all mounting locations. Secure the Shelf Mounting Bracket to the wall using the (4) #10 Pan Head Phillips sheet metal screws (provided) and screw into the solid wood backing.

Table of Contents