Advertisement
Our SCANDLIGHT T-BAR 108 LED SYSTEM offers many possibilities to achieve the effects
which you want. It is pack-and-go for DJs, bands, nightclubs and other performers who want a
complete LED wash light system. This system includes PAR-BAR, a four-pedal foot switch,
adjustable tripod, packing bag and transport case. Please read the manual before operation.
A. SPECIFICATION:
1.
Weight: 13kgs
2.
Size: 1200*2400mm
3.
Power input: AC100-240V/50-60HZ
4.
Wattage: 50W
5.
LEDS: 432 (144 red, 144 green, 144 blue) 10mm LEDs (108 per light)
6.
Beam angle: 30 degree
7.
3 pin female XLR socket and 3 pin male XLR socket
8.
Each light height adjustable.
9.
RGB control of 4 separate lights
10. Independent positioning of each light
11. four-pedal foot switch: auto run, sound active, freeze, blackout
12. Working place: indoor, temperature: -20 °C~+ 45° C, humidity: 0%-90%.
13． LED display for easier operation.
14. Selectable built-in programs, Auto running, DMX mode, M/S, sound-active mode.
15. 7 selectable DMX modes: 2, 3, 4, 7, 8, 14, 15 DMX channels mode.
This system includes: PAR-BAR, a four-pedal foot switch, adjustable tripod, packing bag and
transport case, separate order can be available.
B.OPERATION:
After power on, Press "MODE"button to activate the main menu: Built-in programs mode,
Auto running mode, DMX mode, Slave mode, sound-activited mode.
"SETUP" is to set the relative specification for current mode.
"UP" is to add the value of current specification.
"DOWN" is to decrease the value of current specification.
Built-in programs-- running one of 14 built-in programs
Auto run—running built-in programs one after another in continuous loop.
DMX mode--controlled by DMX controller
Slave mode—the projectors in this mode will be synchronously run with the projectors in
master mode
Sound active mode-- running by sound - activated
four-pedal foot switch: auto run, sound active, freeze, blackout
1. built-in programs mode
Press mode until it shows Prxx, you can select 14 different built-in Programs.
"SETUP" and "UP" "DOWN" buttons to select the programs (from Pr01 to PG14) and
select the desired program values. When it shows Pr01, press "SETUP" to choose the seven
static color.
When it is Pr02 to Pr14, press "SETUP" and "UP" "DOWN" buttons, you can set the
press
Advertisement
