OPERATION
Using the Tractor Lift
Step 3. Engaging Stabilizer Bar
Stabilizer bar MUST be engaged immediately after raising the tractor.
WARNING: Failure to engage stabilizer bar may result in serious personal
injury and or property damage.
•
Remove securing wingnut ( 39 ) from tube handle. Slide stabilizer bar
( 8 ) from foot bar tube.
•
Turn stabilizer bar 180 degrees as shown at bottom of Figure 1.
•
Position stabilizer bar under base of unit between wheels.
•
Slide stabilizer bar back onto foot bar tube as shown in Figure 2.
Tube Handle
Turn 180
39
Figure 1
8
Page 7.
Slide stabilizer bar
back onto foot bar.
Figure 2