Operation; About Detergent - Ranger RS-500-D-601 Installation And Operation Manual

Operation

When your Spray-Wash Cabinet is ready,
crucial, as significant problems can happen later unless you break it in correctly now.
After performing the Start-Up Process, you can use the unit normally.
⚠
CAUTION

About Detergent

Ranger recommends using Aluma-Klean Detergent; in fact, you get a free bucket of this Detergent with
your Spray-Wash Cabinet. To order more Aluma-Klean Detergent,
If you decide to order any other kind of Detergent for your Spray-Wash Cabinet, it is extremely
important that you get the right kind. Any Detergent you use
washers; it must have rust-inhibiting agents (to prevent rust) and be low foaming (to prevent foaming).
⚠
CAUTION
The Material Data Safety Sheet for the Aluma-Klean Detergent is available on
(http://www.bendpak.com/shop-equipment/parts-washer/soap-50-lbs.aspx).
Be careful handling Aluma-Klean when in liquid form; wear gloves and eye protection. Do not ingest;
try not to inhale. Refer to
information.
RS Series Spray-Wash Cabinets
Do not touch the Door or the rest of the Cabinet during or immediately after a Wash
Cycle; you could get burned.
not
Do use high alkaline, high PH, caustic Detergents that are formulated for
harsher cleaning environments; hot dip tanks, for example.
alkaline, high PH, caustic Detergents in your Spray-Wash Cabinet,
you void your warranty
Additional Aluma-Klean Safety Information
you must perform the Start-Up Process first
must
and may cause severe damage to your unit.
13
P/N 5900245 — Rev. B7 — November 2019
visit the Ranger website.
be formulated for mild steel parts
If you use high
the Ranger website
for additional safety
. This is