Download Print this page
Eaton Hatteras Light Power Pedestal Installation Instructions
Eaton Hatteras Light Power Pedestal Installation Instructions

Eaton Hatteras Light Power Pedestal Installation Instructions

Advertisement

Quick Links

Installation Instructions for the Hatteras
Rev. 3 8/21/13
Hazardous voltage. Can cause severe in-
jury or death.
Turn off main power before opening panel.
Eaton Electrical Inc. strongly recommends that these
products be installed by a qualified electrician.
IMPORTANT - INSTALL EQUIPMENT IN CONFORMANCE
WITH CODES
This product must be installed in accordance with the National
Electric Code (NEC) or the Canadian Electrical Code (CEC0 and
any applicable local codes. Before installing equipment, check
with your local electrical inspector for requirements and infor-
mation. If you have questions or need assistance, contact a
qualified electrician.
Light Power Pedestal
®
Turn off or disconnect the power supplying this
equipment before beginning work.
This may require that you contact your electric utility to
disconnect power to an existing load-center. The line
side of the main breaker is energized unless power is
disconnected upstream. Eaton Electrical, Inc. will not
assume responsibility for property damage or personal
injury resulting from misuse of the information in this
publication.

Advertisement

loading

Summary of Contents for Eaton Hatteras Light Power Pedestal

  • Page 1 Light Power Pedestal ® Rev. 3 8/21/13 Hazardous voltage. Can cause severe in- Eaton Electrical Inc. strongly recommends that these Turn off or disconnect the power supplying this jury or death. products be installed by a qualified electrician. equipment before beginning work.
  • Page 2: Wiring Diagram

    Maintenance potentially faulty or loose joints are found, tightening the mounting bolts or screws. they should be tightened or replaced. Eaton - Marina Power and Lighting produces In the cases where mechanical lugs Note Connecting Power Supply to the units that are designed to withstand the harsh...
  • Page 3: Operation

    Connect Power Cord to Boat Our Quality Pledge Insert the proper end of the shore power cord Eaton is dedicated to developing and manu- into the boat’s power inlet connection, twist facturing the highest quality products while the plug to lock, then tighten the locking plug keeping true to our corporate ethics.
  • Page 4: Base Diagram

    Base Diagram Buss Bar Assembly HATTERAS LIGHT ® www.marinapower.com 1-800-723-8009 Installation Guide #70-8631 Rev.3...
  • Page 5 Telephone and Cable TV Assembly Water Assembly HATTERAS LIGHT ® www.marinapower.com 1-800-723-8009 Installation Guide #70-8631 Rev.3...