Setting Up XS-80H Remote Starting/Quitting XS-80H Remote Starting Quitting Turn on the power to the iPad on which XS-80H Remote is Press the Home button on the iPad. installed. Tap the XS-80H Remote icon shown below. Connecting via Wi-Fi How to Connect via Wi-Fi...
Page 3
Insert the optional wireless USB adaptor into the USB WLAN ADAPTOR port on the XS-80H series unit. For the wireless USB adaptor, use the ONKYO UWF-1 or Roland Insert the optional wireless USB adaptor into the USB WNA1100-RL.
Page 4
(If you want to quit, press the [EXIT] button.) WLAN ADAPTOR port on the XS-80H series unit. When a successful connection is made, the unit returns to the For the wireless USB adaptor, use the ONKYO UWF-1 or Roland WIRELESS LAN menu. WNA1100-RL.
Wi-Fi Router Here you set the device name and SSID for the Wi-Fi-connected XS-80H series unit displayed in XS-80H Remote. When multiple XS-80H series devices of the same model are on the Here you connect the XS-80H series device to the Wi-Fi router using...
Tap the [Online] button to display the ONLINE popover. When the ONLINE popover appears, scanning for XS-80H series units capable of communication starts. If the settings for XS-80H Remote and the XS-80H series unit are different, the following popup appears. Select the XS-80H series unit to communicate with.
Panel Descriptions The screen shown below appears when XS-80H Remote starts. Name Description [Online] button This displays the ONLINE popover (p. 6). [Settings] button This displays the Settings screen (p. 9). Tapping a tab changes to a Video Output screen, Audio screen, or Preset screen.
Page 8
Panel Descriptions Audio Screens Name Description This display the volume levels of the audio channels. You adjust the volume of audio input or output by dragging its Audio faders audio fader up and down or tapping the [+] and [-] buttons. (FADER 1–8, OUTPUT FADER) You can use “Audio Control”...
Menu-item settings are saved in the XS-80H series unit as soon as the settings are changed. Be sure to change settings only while the iPad and XS- 80H series device are connected. Note, however, that the “Passcode” setting and the “Photo” setting for “Wallpaper” are saved in XS-80H Remote.
Page 10
If you forget the passcode, reinstall XS-80H Remote. Version Version — This displays the program version information for XS-80H Remote. (*1): The indications on the [On/Off ] switches differs according to the iPad’s language setting and iOS. (*2): “SHARE” can be set for Input 2 through 8.
Need help?
Do you have a question about the XS-80H Remote and is the answer not in the manual?
Questions and answers