Device layout Status menu: Press to check the status of the most frequently Lock button : used features (sensors, Short press: Lock GPS / GPS...) Unlock GPS Power button: Map: Long press: Turn GPS on / Short press: Show tools Turn GPS off Long press: Show Pin Center:...
Get Started To complete the registration process you’ll need to Serial Number (S/N). input your devices Before you turn on your Trail 2* you’ll need to To find your you’ll need to: OS Shop register it with an account. 1. Turn your device over so you can see the back. To register your device go to: 2.
Page 4
Now you’ve registered your Trail 2, you’ll be able To get your map tiles onto your device you’ll need to get your free map tiles and buy any additional to download them. ones via My OS GPS, under your OS Shop account.
Page 5
Now that you’ve registered your Trail 2 and It’s important that you have a good GPS signal downloaded your map tiles, you’re ready to turn before you start. it on. Stand outside in an open area to connect to as Disconnect your USB cable, then press down on many satellites as possible –...
Start an activity Start From the home screen, press on the button to see a list of all activities, then select the one you want to do. Activities include: Get Going Free Activity: Your GPS will record your routes and waypoints.
Page 7
Track your data View your activities, routes and waypoints Your Trail 2 tracks route and activity data in real- time and can track more than 120 different pieces All of your activities, routes and maps are saved of data. onto your GPS, where you can access them whenever you want.
Page 8
GetOutside Bundled Extras Now that you’ve gotten to grips with your Trail 2, Your Trail 2 comes with bundled extras including you’re ready to go. SeeMe and an OS Maps digital subscription – set them up now to get the most out of your device. If you need inspiration for your next adventure, head over to: GetOutside.uk...
Page 9
My Accounts > Add New To set up SeeMe, log in to your OS Shop account, Account > Ordnance Survey user, then enter click My OS GPS, then under My devices click the your OS Maps username (email) and password.
Page 10
Get started with GO The GO Cloud is your very own virtual storage space that automatically syncs and saves your activities to GO (whenever your GPS is connected to Wi-Fi), so that you can view them on your Sync your activities computer through GO and manage your data, routes and achievements.
Page 11
To connect your GO Cloud with Strava™ to GO click on your – www.go.twonav.com – If you’ve purchased a Trail 2 Bike you’ll find a username click Settings in the top right corner, QuickLock Stem Bike Mount in your box to attach...
Page 12
If you’ve purchased a Trail 2 Bike follow these Connect additional sensors to your device using simple steps to attach it to your bike using the Ant+™ and Bluetooth® Smart, to get more insight QuickLock Stem Bike Mount in your box.
Thank you for purchasing your Trail 2 from Ordnance Survey. Now that you’ve completed your set up, you’re ready to start your adventures with the freedom to go further. For a full set of instructions, or if you’ve Warranty & Support...
Need help?
Do you have a question about the Trail 2 Bike and is the answer not in the manual?
Questions and answers