Operation - Bauer 1853C-B Owner's Manual & Safety Instructions

VOLUME
Figure D: Enabling Bluetooth Mode
note: The Radio will beep when BT Mode is selected.
2. Activate your mobile device's (ex: MP3
player, Smartphone) Bluetooth feature.
note: Mobile device not included.
3. If the device has detected the Radio, the word
"BAUER" will be seen on its screen, select it.
4. Successful connection (sync) is indicated when
the Bluetooth symbols are seen on the Radio's
Display and the Radio will beep. See Figure E.
note: Several connection attempts may be
necessary to achieve a successful sync.
VOLUME
Figure E: Bluetooth connection
Radio Operation
1. Pull up the Antenna if folded down.
2. Turn the Radio ON by pressing the
POWER button. The Display will illuminate
when the Radio is powered ON.
note: The Display will dim after approximately
30 seconds of no button being touched.
3. Volume is increased by pressing the VOL+ button
and decreased by pressing the VOL– button.
4. Press the MODE button to scroll and select the
Mode desired: AM or FM radio, BT (Bluetooth),
or Aux (external device, Ex: MP3 player).
5. to play a radio station:
a. Press the MODE button to select AM or FM.
b. Press the Search Forward or Backward
buttons to scroll through stations. The
current frequency is shown on the Display.
c. To jump to the next radio station with high
signal strength, press and briefly hold
Search Forward or Backward button.
Page 10
USB 5V
Bluetooth Symbols
USB 5V
For technical questions, please call 1-888-866-5797.
5. When synced, the Radio can control playback
of audio files on the device (see Figure F):
• The first audio file listed on the device will
start playing through the Radio once sync is
achieved. Press the Bluetooth
to pause playback and again to resume.
• Control volume by pressing the VOL +/- buttons.
• Press the Search Forward
Backward buttons to select other audio files.
SCAN
Volume
Figure F: Bluetooth controls
6. Disconnect the Radio from the device by
press and holding the Bluetooth button
for more than 2 seconds, or deactivate
the Bluetooth feature on the device.
note: The Radio will beep if the Bluetooth sync
connection is lost or Mode is changed.
7. To prevent accidents, turn off the tool and
remove its Battery Pack after use. Clean, then
store the tool indoors out of children's reach.
6. to store a radio station:
a. Tune in the station desired by pressing the
Selection Forward or Backward buttons.
b. Press and hold the PRESET button
until the Radio Station Memory
symbol blinks (see Figure G).
Radio Station Memory Symbol
pRESEt
VOLUME
Figure G: Radio
c. Store the station by pressing and
releasing the PRESET button.
d. Press either Search Forward or Backward
button to escape the Preset Mode.
7. to listen to a stored radio station, press
the PRESET button to scroll through the
stored stations. Stop when the desired
station's frequency is displayed.
8. To prevent accidents, turn off the tool and
remove its Battery Pack after use. Clean, then
store the tool indoors out of children's reach.
button
and
track
Selection
Bluetooth
Button
Item 64825