Contents System Setup ..........................................1 Product Care & Maintenance ..................................6 Facilitating Training ......................................9 FAQ & Troubleshooting ....................................12 Contact Us ..........................................14 Health & Safety Warnings .....................................15...
User Manual System Setup System Setup Designate a table or shelf near a power outlet to set up the VR training system on. You will need about a 32”x24” surface for five headsets. 2. Locate the box containing the Management Device. Unbox the Management Device and the accessories with it: 3.
Page 6
User Manual System Setup 4. Check that a green light is illuminated on the front of the Management Device indicating it is powered 5. Locate the box containing the USB hub. Unbox the USB hub and the accessories with it: 6.
Page 7
8. Locate the white USB-C cable(s). There will be one per headset. Plug each USB-C cable into the USB hub (up to 5 per USB hub): 9. Locate the Pico G2 boxes. Inside each is a headset tethered to a controller. 10. Peel the protective plastic film off the lenses of each headset.
Page 8
User Manual System Setup 11. For each controller, pull down on the lower half of it to reveal the battery compartment. If batteries are not already inserted, insert two AAA batteries. NOTE: Be careful not to detach the tether. If you do, open the battery compartment cover and loop it back around the small plastic peg.
Page 9
User Manual System Setup 14. Connect the Management Device to Internet via one of the following methods: a. Hard-wired via ethernet cable (instruction provided by your company if applicable) Ethernet cable Management Device b. LTE Modem plugged into USB port on the front of the Management Device (will be included in box if applicable to you) NOTE: You may have an AT&T or Verizon LTE modem.
If your system came with plastic bins for storage and transportation of the headsets, place each headset- controller pair inside a section of the bin. Leave the Management Device and USB hub outside of the bins in a permanent location. Product Care & Maintenance Pico G2 Headset - Underside Powering on the Headset Headphone Volume...
Page 11
LED indicator. LED Indicators Depending on the color and whether they’re solid or blinking, the lights on the Pico G2 headset will indicate the following: H E A D S E T L I G H T I N D I C AT O R M E A N I N G S...
Page 12
User Manual Product Care & Maintenance Changing the Controller Batteries The controller takes two AAA batteries. To change the batteries, pull down on the lower half of the controller to remove the end cap and replace the batteries. You may check the precise battery level percentage during training by holding the controller in front of the headset.
User Manual Facilitating Training Use the dry lens micro-fiber cloth included with your system to clean the headset lenses as needed. Don’t use liquid or chemical cleansers. Starting from the center of the lens, gently wipe the lens in a circular motion moving outwards.
Page 14
User Manual Facilitating Training Putting on and Adjusting the Headset • Make sure the trainee is aware of their surroundings before putting on the headset. • The headset has two side velcro straps and one top rubber strap. Trainees should put the headset on like a pair of goggles and adjust the side straps until the headset is comfortable and does not feel like it is falling down.
Page 15
User Manual Facilitating Training Logging Out • Trainees should select “Log off” inside the headset before ending their training session and taking off the headset. A complete training session includes three steps: Successful login, Successful completion of training, and successful logout. •...
User Manual FAQs & Troubleshooting FAQ & Troubleshooting My controller is not showing up or is in the wrong place. If you’re having trouble using the controller, try one of the following: • Press and hold down the Home button for 2 seconds to re-calibrate (re-center) the controller. •...
Page 17
User Manual FAQs & Troubleshooting Why is everything gray in the headset? • Be sure to look all around in the 360-degree view. There may be a menu option behind you. • Try plugging the headset into the USB-C cable for 15 seconds to restart the session, then unplug and resume training.
User Manual Contact Us Contact Us Strivr Support: https://support.strivr.com US & Canada: +1 855-897-0082 UK: +44 808-169-4550 support@strivr.com Support Hours: Monday-Friday 5:00am-5:00pm Pacific support.strivr.com...
User Manual Health & Safety Warning Health & Safety Warnings Strivr USING VIRTUAL REALITY (“VR”) CAN POTENTIALLY HAVE UNINTENDED HARMFUL EFFECTS ON YOUR HEALTH OR SAFETY. TO REDUCE THE RISK OF PERSONAL INJURY, DISCOMFORT, OR PROPERTY DAMAGE, PLEASE ENSURE THAT ALL USERS READ THESE WARNINGS CAREFULLY BEFORE USE. CONSULT WITH A PHYSICIAN BEFORE USING VR IF YOU ARE PREGNANT, ELDERLY, EPILEPTIC, OR HAVE VISION, PSYCHIATRIC, HEART, OR OTHER SERIOUS MEDICAL CONDITIONS.
Page 20
User Manual Health & Safety Warning SAFETY PRECAUTIONS Wearing a VR headset may distract you from, and will completely block your view of, your actual, physical surroundings. Always be aware of your surroundings before beginning use and while using the headset. Use caution to avoid injury. Use of a VR headset may cause loss of balance.
Page 21
User Manual Health & Safety Warning Pico Before using this product, please read the following warnings and information and follow all product safety and operating instructions. Failure to follow these guidelines can result in personal injuries (including electric shock, fire, and other injuries), damage to property, and even death.
Need help?
Do you have a question about the Pico G2 and is the answer not in the manual?
Questions and answers